Cart 2 india

Specification
Brand : ENGINEER
BulletPoint : Specifications: Hot Blow Tip for SK-70 Series
BulletPoint1 : Total Length: 13.7 inches (349 mm)
BulletPoint2 : Vacuum Reach: Approx. 50 kPa
BulletPoint3 : The furnace is made of high quality stainless steel plate, heatproof,solid and
BulletPoint4 : Temperature Range:200℃~450℃,quickly melting tin.
BulletPoint5 : Easy to use and maintain, excellent heat effects.widely used in transformers,coil pin tin plating, electronic transformers,electronic wire production, etc.
Color : Hot Blow [Inner Diameter Φ 0.19 Inches (4.9 Mm)]
ExternallyAssignedProductIdentifier : 4962772039915
ExternallyAssignedProductIdentifier1 : 4989833050849
ExternallyAssignedProductIdentifier2 : 4963009060924
HeatingElementType : Titanium
IncludedComponents : なし
ItemLength : 13.7 inches
ItemName : ENGINEER Hot Blow Tip SK-84 for Engineers SK-70 Series
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 0.1 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : soldering-irons
Manufacturer : エンジニア(ENGINEER)
Material : Solid Copper Iron Plating
ModelName : SK-84
ModelNumber : SK-84
PartNumber : SK-84
PowerSourceType : Corded Electric
ProductDescription :

Specifications:

Material: Stainless steel + plate

Input Voltage: AC110V  60Hz

Plug Type: US plug

Power:150W

Temperature Range: 200℃-450℃

Melting Time: Approx. 8 minutes

Capacity: 500g

Slot Diameter: 50mm/1.97in

Package Includes:

1 x Solder Pot

Note:

1. This product must be grounded. Improper installation of the grounding must be prohibited.

2. Position the control dial to high range when you start to use the solder pot, and then place the dial     to the grade of auto-temperature after soldering. 
3. The general working temperature of molten solder in the solder pot is 300-350℃ (around grade     4-grade 9). The temperature of solder shouldn't be too high, or it will cause the aging of     solder pot, the darkening or yellowing of solder. 
4. When highly acidic scaling powder is applied, the solder pot is more likely to be corroded or     perforated under extraordinarily high temperature. 
5. The power must be turned off before leaving to avoid accidents.
ProductSiteLaunchDate : 2013-08-29T00:43:38.482Z
Size : SK-84(内径4.9)
SpecificUsesForProduct : Electronic
Style : Hot Blow [Inner Diameter Φ 0.19 inches (4.9 mm)]
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800
UpperTemperatureRating : 450 degrees_celsius
Wattage : 150 watts