SpecificationBrand : waveshare
BulletPoint1 : Configurable device address (1~255), multi devices can be cascaded on RS485 bus
BulletPoint2 : Onboard voltage regulator, supports 7~36V wide range power supply. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
BulletPoint3 : Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference
BulletPoint4 : Onboard resettable fuse and TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, provides over-current/over-voltage proof, lightningproof & anti-electrostatic
BulletPoint5 : Supports passive and active digital input, with bi-directional optocoupler isolation, built in debouncing algorithm. Supports DI/DO linkage control or DO toggle control
BulletPoint6 : The output utilizes Darlington transistors with optocoupler isolation, provides stronger driving capability with up to 500mA sinking current, built in flyback diode protection
BulletPoint7 : Features flash-on, flash-off function, by passing argument to the command, it is possible to turn on the output for a while and then close it automatically
BulletPoint8 : Rail-mount case design, support stacking combination, easy to install and safer to use
BulletPoint9 : Multiple LEDs for indicating the input & output status, MCU status and signal transceiving status
Color : ME31-AAAX4220
ConnectorType : Screw
CurrentRating : 0.5 amps
ExternallyAssignedProductIdentifier : 6921407349360
IncludedComponents1 : Modbus RTU IO 8CH x1
IncludedComponents2 : Power supply terminal adapter x1
IncludedComponents3 : Screwdriver x1
ItemName : Waveshare Industrial 8-Ch Digital Input & Output Module, DC 7~36V Wide Voltage Power Supply, Modbus RTU Protocol, Multiple Isolation Protection Circuits, Rail-Mount Support
ItemPackageDimensions_Height : 13.5 centimeters
ItemPackageDimensions_Length : 4.1 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : io-modules
Manufacturer : Waveshare
Material : copper
ModelName : Modbus RTU IO 8CH
ModelNumber : Modbus RTU IO 8CH
MountingType1 : Panel Mount
MountingType2 : din_rail
NumberOfContacts : 3
NumberOfItems : 1
PartNumber : Modbus RTU IO 8CH
ProcessorCount : 1
ProductDescription :
RJ45 8P8C 4-Way Buss Board DIN Rail Mount Interface Module.
RJ45 vertical shielded 8P8C jacks.
Pitch 3.81mm/0.15" screw terminal block.
DIN rail mountable - for width 35 / 32 / 15mm rails.
DIN mount case can be taken apart for panel mount use.
High quality PCB housing/carrier.
Solder connection holes, three (3) per line, supports addition of 0.1" pin headers.
FR-4 fiber glass PCB, dual copper layers.
External dimensions: 72 x 49.5 x 42mm(W x L x H).
PCB dimensions: 72 x 47.35(W x L).
100% new, never used.
Rated voltage: 50V.
Rated current: 0.5A / per pin.
Operating Temperature: -20ºC to 50ºC
Terminal block specifications:
Wire range: 26 ~ 16AWG.
Strip length: 5mm.
Screws: M2, steel, Cr3+ Zn plated.
Pin header and Cage: Brass.
ProductSiteLaunchDate : 2024-01-05T06:48:02.180Z
SpecificationMet : Din
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 39121000
Voltage : 100 volts
WarrantyDescription : 1
WirelessCommStandard : 802_11_B