Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : High Temperature Resistance: This network controller is high temperature resistant and can work in an environment of -40 degrees to +85 degrees.
BulletPoint2 : Application: This is a network controller that can be used to monitor whether routers or other network devices are disconnected.
BulletPoint3 : Normally Closed Output--2 channel IP network relay normally closed output (no normally open output), the output does not carry voltage or current.
BulletPoint4 : Featured Function: The relay will actively the set IP. When the fails, the relay will be disconnected for 10 seconds and then closed (this function is used to restart network devices, such as routers).
BulletPoint5 : Maximum Load Can be Connected: The network controller with chip and program upgrade can be connected to the maximum load, DC 5A, AC 10A, maximum voltage 250V.
Color : 2pcs
CurrentRating1 : 5 amps
CurrentRating2 : 10 amps
ExternallyAssignedProductIdentifier : 7670863261028
ExternallyAssignedProductIdentifier1 : 0310425545308
ExternallyAssignedProductIdentifier2 : 310425545308
IncludedComponents : inc
ItemName : IP Network Relay Module Upgraded 2 Channel Internet Watchdog Remote Control Modules Network Controller HHT-NET2D DC12V -40 to +85 Degrees
ItemPackageDimensions_Height : 10.9 centimeters
ItemPackageDimensions_Length : 3.9 centimeters
ItemPackageDimensions_Width : 9.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-converters
Manufacturer : Walfront
Material : Material
MaximumSwitchingVoltage : 250 volts
ModelName : LABDIP
ModelNumber : LABDIP
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Automatic
PartNumber : Walfrontg5tw91rquf95
ProductDescription :

How to Use:
1. The power supply is 7‑24V, 12V is recommended. NC1 and COM1 are the first constant closing relay output, and NC2 and COM2 are the second relay output.
2. P5 is used to factory equipment. After removing the P5 jumper and powering on again, the factory device can be restored, and the factory device IP is restored to 192.168.0.105. The controller can work in TCP server, TCP client and UDP modes, which is easy to configure using configuration software. After configuration, the jumper wires should be bolted. Turn on the power again.
3. Run the configuration software, select the network card, and click search. After searching the device, double click the list on the left to read the device parameters.

Specification:
Item Type: IP Network Relay Module
Model: HHT-NET2D
Power Supply Voltage: DC12V
Industrial Grade Working Environment: -40 to +85 Degrees.
The Maximum Load That Can be Connected: DC 5A, AC 10A, Maximum Voltage 250V.
(Chip and Program Upgrade)

Package List:
1 x Network Watchdog

ProductSiteLaunchDate : 2021-09-29T14:20:25.683Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39122300