Cart 2 india

Specification
Brand : Neem Tech
BulletPoint1 : Operating voltage up to 30VDC; continuous current of 15A per output; continuous current of 15A cumulative for all outputs; turns output on with 2.5V - 20V to the gate
BulletPoint2 : Pre-soldered connectors allow for easy, out-of-the-box use. The pins use a 0.1" pitch, making them breadboard-friendly.
BulletPoint3 : Compatible microcontrollers - including Raspberry Pi, Arduino, and BeagleBone - allow for easy control of RGB/RGBW LED light strips, motors, and other loads. PWM support allows for brightness control of lights.
BulletPoint4 : Low resistance MOSFETs (0.01Ω) means less heat and highly reliable operation at a wide range of temperatures.
BulletPoint5 : Quality control ensures that every board shipped meets our high standards and works as advertised. The board is designed and manufactured in California.
BulletPoint6 : NON-ECC Unbuffered ( UDIMM ) | 1Rx8 or 2Rx8 - Single or Dual Rank | JEDEC DDR2 standard 1.8V
Color : green
ColumnAddressStrobeLatency : 17
CompatibleDevices : Laptop
Configuration : Single Module
CustomerPackageType : Standard Packaging
DataTransferRate : 19.2 megabytes_per_second
ExternallyAssignedProductIdentifier : 4712702651416
ExternallyAssignedProductIdentifier1 : 07406172077810
ExternallyAssignedProductIdentifier10 : 5053973626017
ExternallyAssignedProductIdentifier11 : 8800161214474
ExternallyAssignedProductIdentifier12 : 8800161214054
ExternallyAssignedProductIdentifier13 : 8800161214214
ExternallyAssignedProductIdentifier14 : 5054230219157
ExternallyAssignedProductIdentifier15 : 5425656154122
ExternallyAssignedProductIdentifier16 : 0012302230917
ExternallyAssignedProductIdentifier17 : 8800161214634
ExternallyAssignedProductIdentifier18 : 8800161213804
ExternallyAssignedProductIdentifier19 : 5054629132654
ExternallyAssignedProductIdentifier2 : 05053118039979
ExternallyAssignedProductIdentifier20 : 7406172077810
ExternallyAssignedProductIdentifier21 : 5054531085383
ExternallyAssignedProductIdentifier22 : 0080850208719
ExternallyAssignedProductIdentifier23 : 5053118039979
ExternallyAssignedProductIdentifier24 : 5053973933160
ExternallyAssignedProductIdentifier25 : 0115971055574
ExternallyAssignedProductIdentifier26 : 8800161212944
ExternallyAssignedProductIdentifier27 : 0013201070680
ExternallyAssignedProductIdentifier28 : 0825057348000
ExternallyAssignedProductIdentifier29 : 5053973983356
ExternallyAssignedProductIdentifier3 : 08800161214634
ExternallyAssignedProductIdentifier30 : 0132017928791
ExternallyAssignedProductIdentifier31 : 8800161212784
ExternallyAssignedProductIdentifier32 : 0151903586891
ExternallyAssignedProductIdentifier33 : 0163120668045
ExternallyAssignedProductIdentifier34 : 8800161213514
ExternallyAssignedProductIdentifier35 : 0069060106473
ExternallyAssignedProductIdentifier36 : 8800161213194
ExternallyAssignedProductIdentifier4 : 00740617207781
ExternallyAssignedProductIdentifier5 : 740617207781
ExternallyAssignedProductIdentifier6 : 8800161212814
ExternallyAssignedProductIdentifier7 : 2273724022421
ExternallyAssignedProductIdentifier8 : 0740617207781
ExternallyAssignedProductIdentifier9 : 5053973005928
FormFactor : SO-DIMM
GpsrSafetyAttestation : 1
ItemName : Quad/Tri MOSFET Breakout 30V 15A Low Resistance, High Power, PWM Support, Quality Controlled Switching (Tri)
ItemPackageDimensions_Height : 9.4996 centimeters
ItemPackageDimensions_Length : 1.7018 centimeters
ItemPackageDimensions_Width : 6.7056 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : computer-internal-power-supplies
Manufacturer : Neem Tech
MaximumCurrent : 15 amps
MemorySpeed : 2400 MHz
MemoryStorageCapacity : 32 GB
ModelName : DDR4-2400
ModelNumber : NT003-004
NumberOfBoxes : 1
NumberOfCircuits : 4
NumberOfItems : 1
NumberOfLithiumIonCells : 5
NumberOfLithiumMetalCells : 5
NumberOfPins : 260
PackageLevel : unit
PartNumber : NT003-004
Pattern : Single Item
ProductDescription : This breakout board makes it easy to switch loads on and off using your favorite Arduino, Raspberry Pi, BeagleBone, or other microcontroller. It uses N-Channel PSMN011-30YLC MOSFETs. While each MOSFET can handle 37 amps, the board and connectors are only rated for 15 amps.This means the combined current for all of the MOSFETs cannot exceed 15 amps without risking damage to the board. The board's dimensions are 2.0" x 1.6" (50mm x 40mm).
The quad board has 4 outputs and the triple board has 3 outputs. This makes the quad board perfect for controlling RGBW light strings, while the triple board is perfect for controlling RGB light strings.
ProductSiteLaunchDate : 2020-08-31T03:24:07.450Z
SafetyDataSheetUrl : https://www.conrad.de/scripts/wgate/zcop_bilder/!?show_artnum=1227441
Size : 16GB×2枚
StreetDate : 2018-09-29T00:00:01Z
Style : Tri
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 32111600
Voltage : 1.2 volts
WarrantyDescription : Lifetime
Wattage : 1.2