Cart 2 india

Specification
Brand : MAROBEE
BulletPoint1 : Premimum Quality Fuse - One sided cotton fusible interfacing can be easily fused with hot iron. No steam required. Pressing Temperature 160 C - 175C. Pressing time 10 - 15 sec
BulletPoint2 : Packaging - This 100% Cotton fusible interfacing comes in one large sheet of size 45 inch x 2 Yards. Cut with ease according to the size required for your sewing or quilting projects.
BulletPoint3 : Best Uses - Collars, Cuffs, Handbags, Pouches. Good for firm fabrics such as cotton Linen
BulletPoint4 : Application: It can be used for quilts and crafting projects. Good for use in light to medium weight fabrics and in Plackets, yokes, pockets, blouses, needle work, punch embroidery and as backing material.
BulletPoint5 : Note - Be careful in aplyying this cotton woven fusible interfaing. Make sure to use the interfacing on the wrong side of the fabric. make sure that the adhesive coating (shiny side) of the interfacing is facing down.
CareInstructions : Hand Wash Only
Color : Medium Weight
CompatibleMaterial : Wood
ExternallyAssignedProductIdentifier : 9369998428588
ExternallyAssignedProductIdentifier1 : 075269009125
ExternallyAssignedProductIdentifier2 : 0075269009125
ExternallyAssignedProductIdentifier3 : 00075269009125
FabricType : Paper
FcShelfLife : 1 days
GpsrSafetyAttestation : 1
ItemDisplayDimensions_Height : 0.8 inches
ItemDisplayDimensions_Width : 2.83 inches
ItemDisplayWeight : 0.02 pounds
ItemForm : Solid
ItemName : MAROBEE Woven Cotton Iron On Fusible Interfacing for Sewing Projects - 44 Inch x 2 Yards - Hard Feel (HF) Medium Weight Interfacing for Collars Cuffs Handbags DIY Craft Supplies
ItemPackageDimensions_Height : 31.496 centimeters
ItemPackageDimensions_Length : 1.905 centimeters
ItemPackageDimensions_Width : 29.21 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : fabric-interfacing
Language : english
Manufacturer : Marobee
Material : Cotton
ModelName : Misswendyfuse knit stay tape
ModelNumber : HF-Cotton-Interfacing
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : HF-Cotton-Interfacing
Pattern : Solid
ProductDescription :

DESCRIPTION:
Product size:11.65*7.95 inches
Packing size: 12.1*9*0.43 inches
Packaging: bagged

PACKING LIST:
20* double-sided adhesive paper

ProductDescription1 : Misswendyfuse knit stabilizer/knit stay tape is composed of 90%cottonfabrics10%synthetic fibres,lightweight,soft and stretch,one side with adhesive,The most common sizes are 1/2 inch and 1 inch wide it is used to stabilize seams on stretchy knit fabrics,fit for light to mid-weight fabrics,great for woven, knits,blouses and sheer garments. Misswendyfuse prevents seams from stretching out or becoming misshapen over time.It’s particularly useful in shoulder seams, pant hems,neck and areas with wear and tear (like zippers). To hem knits and make the more finished edge of hem, place Misswendyfuse slightly inside raw edge,Particular attention of putting wrong side down and fusible side up, then sewing as flat as you can, last fold the hem and fuse it. Always test on a sample first and use a press cloth, iron temperature set from 250-280℉ for 8-10 seconds. Embroidery: Misswendyfuse is extremely fine and stretchy of fabric material, Some shirts has embroidered panel on, and it is very itchy against the body, after cover the tape, the embroidery does not scratch.
ProductDescription2 : In package it figure out which side was fusible,so it can quick hems on knit fabrics.using a stabilizer should lead to less tunneling especially in lightweight knits. if you have wavy hems,put your iron on a setting that produces steam.hover the iron about 1 inch away from your hem and apply steam.this should relax the fabric back into shape and it should lie flatter.
ProductDescription3 : This tape is perfect for stabilizing and sewing hems on knit fabrics. It's a bias tape, so there's a bit of stretch, but it still stabilizes hems for sewing really easily and keeps them from needing extra basting or getting that stretched out, wavy look. One caution if using on a poly knit or other knit that can't take a higher heat or steam setting: you can steam baste the tape or baste it on with a polyester or synthetic setting, but you will need follow up by thread basting it (by machine or hand) to keep it in place if you won't be sewing your hem or other seam right away. If you're working with a knit that can take higher heat and steam, it will adhere without extra basting.
ProductDescription4 : How to making hem of T-shirts? Cut off the excess off the shirt and ironed on the stabilizer to the raw edge. Use a press cloth and get the adhesive to melt. After this process, pressed up the hem to the 1 inch width of the hem tape. Then set sewing machine to a stretch stitch and sewed the hem. The stabilizer made it so easy to sew!
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2023-05-15T23:03:43.158Z
RecommendedUsesForProduct : Sewing
Size : HF (Hard Feel)
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Fabric
TargetAudienceKeyword : Professional Audience
UnitCount : 1
UnspscCode : 31151500
WarrantyDescription : 3 month return