Cart 2 india

Specification
Brand : gernie
BulletPoint1 : ‑Adjusting Potentiometer: The point can be adjusted by the ‑adjusting potentiometer to improve the accuracy, and there will be no ‑point drift to meet customer needs
BulletPoint2 : Negative Pressure Output Utilizes 7660a chip for negative pressure vin output, ideal for driving various dual power loads.
BulletPoint3 : Wide Application: Suitable for various instruments and transmitters, providing convenience when amplifying weak or converting voltage.
BulletPoint4 : Adjustable Magnification With a potentiometer, this module can amplify up to 1000 times, providing adjustments for your needs.
BulletPoint5 : Mini Design Compact 32 x 22mm module with 4 positioning holes and 2.54mm spacing for easy installation in constrained spaces.
ExternallyAssignedProductIdentifier : 7903687458177
ItemName : Voltage Amplifier Module Small Transmitter Millivolt Drive Microvolt for Ad620, Instrumentation
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemTypeKeyword : instrumentation-amplifiers
Manufacturer : gernie
ModelName : gerniegeytaks5vx
ModelNumber : gerniegeytaks5vx
PartNumber : gerniegeytaks5vx
ProductDescription : 1. The input range is wide. This product uses AD620 to amplify, which can amplify microvolts and millivolts. Possess higher amplification accuracy and better linearity than the LM358 on the market, and the maximum voltage output range is ±9V
2. A potentiometer is used to amplify the input , the magnification is up to 1000 times, and can be adjusted only through a potentiometer
3. The zero point can be adjusted by the zero?adjusting potentiometer to improve the accuracy, and there will be no zero?point drift to meet customer needs
4. The module uses 7660A negative pressure chip to output negative pressure (-Vin), which can be provided to customers to drive other dual power loads
5. Mini type, size is 32 x 22mm, there are 4 3mm positioning holes evenly distributed around, 2.54mm standard spacing on both sides

Spec:
Item Type: Voltage Amplifier Module
Material: Resin
Model: AD620
Input Voltage: DC 3-11V
Magnification: 1.5-1000 Times adjustable, zero point adjustable
Common Mode Rejection Ratio: 100dB
Input Bias Current: 1.0nA (maximum)
Negative Pressure Output: Greater than -Vin. Due to the output internal resistance of the negative pressure chip, the actual output is greater than -Vin, and the greater the load power, the greater the negative pressure drop
Size: Approx. 32 x 22mm / 1.3 x 0.9in
Positioning Holes: Approx. 3mm / 0.12in
Standard Spacing: Approx. 2.54mm / 0.1in

How to Use:
Wiring diagram of zero adjustment before use, wire the zero adjustment according to the diagram, short?circuit +S and ?S, and adjust the zero adjustment knob to make the output Vout 0V.

Package List:
1 x Voltage Amplifier Module
2 x Pin Header

Note:
+S: input terminal, ?S: input negative terminal(can be connected to GND), Vout output, V? output a voltage of ?Vin (for sensor power supply). input, output, power input, the 3 must share the
ProductSiteLaunchDate : 2024-04-10T14:17:10.189Z