Cart 2 india

Specification
Brand : Reland Sun
BulletPoint : AD8221AR MSOP Gain Programmable Precision Instrumentation Amplifier Module Reject Wideband Programmable Instrument Amplifiers
BulletPoint1 : The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
BulletPoint2 : You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
BulletPoint3 : This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
BulletPoint4 : Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
BulletPoint5 : Module supply voltage: ±15V (MAX)
ConnectivityProtocol : X-10
ExternallyAssignedProductIdentifier : 4852343706158
ExternallyAssignedProductIdentifier1 : 0739227440480
ExternallyAssignedProductIdentifier2 : 739227440480
ItemName : SPH0645 Digital Sound Sensor Module I2S ISS Interface MEMS Microphone Breakout SPH0645LM4H for Arduino GY-SPH0645
ItemPackageQuantity : 1
ItemTypeKeyword : instrumentation-amplifiers
Manufacturer : Reland Sun
Material : Copper
ModelNumber : KWKJ-AD620
NumberOfChannels : 1
OperatingVoltage : 250 volts
PartNumber : 739227440480
ProductDescription :

Description:

 

The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones! 

You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.

 

This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways). 

 

Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.

 

 

Package Includes:

 

1 X  SPH0645 I2S MEMS Microphone Breakout Sensor 

ProductSiteLaunchDate : 2021-03-26T07:28:04.628Z
Size : Normal Open 105°C
SwitchType : Temperature Switch
UnitCount : 5
Voltage : 12 volts