Cart 2 india

Specification
Brand : Generic
BulletPoint : 5PCS AD623ARZ AD IC OPAMP INSTR 800KHZ RRO 8SOIC NEW
BulletPoint1 : Small size, 4 3mm positioning holes are evenly distributed, 2.54mm standard pitches are arranged on both sides, and the maximum voltage output range is ±10V.
BulletPoint2 : Adjust the zero point via the zero adjustment potentiometer to improve accuracy and no zero drift phenomena to meet customer requirements.
BulletPoint3 : A potentiometer is used to amplify the input signal, the magnification is up to 1000x and can only be adjusted using a potentiometer.
BulletPoint4 : Wide input range, with AD620 for amplification, can amplify microvolts and millivolts, higher accuracy and linearity than the LM358 on the market.
BulletPoint5 : There is a negative pressure output module and the 7660A negative pressure chip is used to output negative pressure (‑VIN), which can be provided to customers to drive other power loads.
Color : #811
ExternallyAssignedProductIdentifier : 7341568129981
IncludedComponents : No
ItemName : Millivolt Voltage Amplifier, High Accuracy, Good Linearity, Magnification 1000x, Easy to Use Instrument Amplifier
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : instrumentation-amplifiers
Manufacturer : Generic
ModelName : Generic241dkgcs8r
ModelNumber : Generic241dkgcs8r
NumberOfItems : 1
PartNumber : Generic241dkgcs8r
ProductDescription : 1. Wide input range, with AD620 for amplification, can amplify microvolts and millivolts, higher accuracy and linearity than the LM358 on the market.
2. A potentiometer is used to amplify the input signal, the magnification is up to 1000 times and can only be adjusted via a potentiometer.
3. Adjust the zero point via the zero adjustment potentiometer to improve accuracy and no zero drift phenomenon to meet customer requirements.
4. There is a negative pressure output module, and the 7660A negative pressure chip is used to output negative pressure (‑VIN), which can be provided to customers to drive other power loads.
5. Small size, 4 3mm positioning holes are evenly distributed, 2.54mm standard pitches are arranged on both sides, and the maximum voltage output range is ±10V.

Specification:
Item Type: Millivolt Voltage Amplifier
Magnification: 1.5-1000x adjustable, the zero point can be adjusted in the same way as the lower one
output range: ± (VIN-2V)
Vacuum output: greater than -VIN. Due to the internal output of the vacuum chip, the actual output is greater than -VIN. The greater the load power, the greater the negative pressure drop
Input bias current: 1.0 NA (maximum)
Common mode rejection ratio: 100dB Stable time: 2 MV/month. Maximum simultaneous interpretation set. Size: Approx. 32 x 22mm / 1.3 x 0.9 inch

Packing list:
1 x Millivolt Voltage Amplifier

A notice:
Using the module requires a certain electronic base. If there is no basic customer, please buy with caution. Our shop offers technical support.
ProductSiteLaunchDate : 2024-09-15T18:35:54.085Z
Size : MPMF8490
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52161500