Cart 2 india

Specification
Brand : LiebeWH
BulletPoint1 : [HIGH ACCURACY AND LINEARITY] Amplify microvolts and millivolts with AD620 for higher accuracy and linearity than other available.
BulletPoint2 : [ADJUSTABLE MAGNIFICATION] Easily adjust amplification up to 1000 times using a potentiometer.
BulletPoint3 : [IMPROVED ACCURACY] Null point can be adjusted to enhance and prevent null-point drift.
BulletPoint4 : [NEGATIVE PRESSURE OUTPUT] Drive other dual power loads with the 7660A negative pressure chip for added versatility.
BulletPoint5 : [SMALL AND CONVENIENT] Compact size with positioning holes for easy installation. Maximum voltage output range of ±10V.
ItemName : Millivolt Voltage Amplifier High Accuracy Good Linearity 1000x Magnification Easily Use Instrumentation Amplifier for Measurement
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : instrumentation-amplifiers
Manufacturer : LiebeWH
ModelNumber : LiebeWHgguaz0vob2
PartNumber : LiebeWHgguaz0vob2
ProductDescription : 1. Wide input range, using AD620 to amplify, can amplify microvolts and millivolts, higher accuracy and linearity than the LM358 on the market.
2. A potentiometer is used to amplify the input , the magnification is up to 1000 times, and it can be adjusted only through a potentiometer.
3. Adjust the null point through the null point adjusting potentiometer to improve the accuracy, and there will be no null‑point drift phenomena to meet customer needs.
4. There is a negative pressure output module, and the 7660A negative pressure chip is used to output negative pressure (‑VIN), which can be provided to customers to drive other dual power loads.
5. Small size, 4 3MM positioning holes are evenly distributed around, 2.54MM standard spacing is arranged on both sides, and the maximum voltage output range is ±10V.

Specification:
Item Type: Millivolt Voltage Amplifier
Input Voltage: 3-12VDC
Magnification: 1.5-1000 Times Adjustable, the Null Point Can Be Adjusted the Same As the Lower One
Input Voltage: 100UV--300MV
Output Range: ± (VIN-2V)
Negative Pressure Output: Greater Than -VIN. Due to the Output Internal of the Negative Pressure Chip, the Actual Output is Greater Than -VIN, the Greater the Load Power, the Greater the Negative Pressure Drop
Offset Voltage: 50MV
Input Bias Current: 1.0NA (Maximum)
Common Mode Rejection Ratio: 100DB
Offset Voltage Drift: 0.6MV / C (Maximum)
Stable Time: 2MV / Month Maximum Simultaneous Interpretation Set
Size: Approx. 32 x 22mm / 1.3 x 0.9in

Package List:
1 x Millivolt Voltage Amplifier

Note:
The use of the module requires a certain electronic basic. If there is no basic customer, please purchase with caution. Our store provides technical support.

ProductSiteLaunchDate : 2024-03-18T06:39:21.018Z
UnspscCode : 39121000