Cart 2 india

Specification
Brand : CHUANGYEIC
BulletPoint : AD620 Microvolt MV Voltage Signal Instrumentation Module Board 3-12VDC Arrival
BulletPoint1 : ‑Adjusting Potentiometer: The point can be adjusted by the ‑adjusting potentiometer to improve the accuracy, and there will be no ‑point drift to meet customer needs
BulletPoint2 : Negative Pressure Output Utilizes 7660a chip for negative pressure vin output, ideal for driving various dual power loads.
BulletPoint3 : Wide Application: Suitable for various instruments and transmitters, providing convenience when amplifying weak signals or converting voltage.
BulletPoint4 : Adjustable Magnification With a potentiometer, this module can amplify up to 1000 times, providing precise adjustments for your needs.
BulletPoint5 : Mini Design Compact 32 x 22mm module with 4 positioning holes and 2.54mm spacing for easy installation in constrained spaces.
ExternallyAssignedProductIdentifier : 7903687458177
ExternallyAssignedProductIdentifier1 : 0027541180244
ExternallyAssignedProductIdentifier2 : 027541180244
ItemName : 2PCS THS3110IDGN IC OPAMP CFA 1 Circuit 8HVSSOP
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : instrumentation-amplifiers
Manufacturer : CHUANGYEIC
Material : Copper
ModelName : ZIZEVhg6dnv793c
ModelNumber : ZIZEVhg6dnv793c
NumberOfItems : 1
PartNumber : THS3110IDGN
ProductDescription :
Descriptions:
UV / mV high voltage ,
transmitter AD620 small signal instrumentation
Using AD620 as the main , it can
amplify the voltage uV, mV. Magnification from 1.5 to 10,000x, adjustable. High
, low compensation, better linearity. Zero adjustable to improve
accuracy. Can be used for AC, DC signal amplification. Use of the module, you
need to have a certain electronic base, if there are no basic customers, please
buy carefully, shop to provide technical support.
Product highlights:
1: wide supply voltage range, the AD620
amplification of this product can be amplified microvolts, millivolts, compared
to the LM358 amplification , better linearity, the maximum voltage
output range of ± 10V.
2: widening range, increase up to 1000 ti2
months, only through a potentiometer can be adjusted.
3: zero adjustable through the zero potentiometer
to adjust the zero, improve accuracy, there will be no zero drift phenomenon to
meet customer needs.
4: a negative voltage output, the module
uses a 7660A (-Vin) chip output negative voltage, can be provided to the
customer to drive another dual power load.
5: Mini type, the size of 32x22x13.4mm,
evenly distributed around the four 4mm positioning holes, both sides of the
standard pitch hole 0.100mm port.
Product parameters:
Input voltage: 3-12 V DC. (Bulk purchase
can be customized)
Magnification: 1.5-1000 times adjustable,
zero adjustable.
Signal input voltage: 100 uV - 300 mV.
Signal output range: ± (Vin-2V)
Negative voltage output: greater than -Vin.
As the negative voltage chip output resistance problem, the actual output is
greater than -Vin, the greater the load power, the greater the negative voltage
drop.
Disconnection voltage: 50 μV.
Input bias current: 1.0nA (maximum).
Common mode rejection ratio: 100 dB
Drift voltage offset: 0.6 μV / °
ProductSiteLaunchDate : 2024-04-11T03:23:58.204Z