Cart 2 india

Specification
Brand : Hitachi
BulletPoint : Twist drill
BulletPoint1 : The 3/4-Inch thick Hitachi 728474 has a length of 18-Inch and includes a round shank helping your tool keep a tight grip while in use
BulletPoint2 : Hitachi DuraCore treated products are manufactured utilizing a proprietary technologically superior to cryogenic treatment
BulletPoint3 : Used for drilling and running wires through walls, ceilings and floors
BulletPoint4 : Hitachi DuraCore products are proven to last longer and outperform the competition
BulletPoint5 : Comes with a 30-day limited warranty
Color : Green
CustomerPackageType : 1
CuttingAngleString : 90 degrees
ExternallyAssignedProductIdentifier : 4962660071188
ExternallyAssignedProductIdentifier1 : 754005284742
ExternallyAssignedProductIdentifier2 : 0754005284742
ExternallyAssignedProductIdentifier3 : 00754005284742
FinishType : Titanium Nitride
GpsrSafetyAttestation : 1
IncludedComponents : 1 x TIMco TCT Tile & Glass Bit 6.0mm - (Pack 1) - TG6
ItemDisplayDimensions_Length : 1 millimeters
ItemName : Hitachi 728474 3/4-Inch By 18-Inch Round Shank Installer/Aircraft Hss Drill Bit
ItemPackageDimensions_Height : 1.524 centimeters
ItemPackageDimensions_Length : 45.72 centimeters
ItemPackageDimensions_Width : 1.778 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : installer-drill-bits
Manufacturer : Hitachi
Material : High Speed Steel
ModelNumber : 728474
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 728474
ProductDescription : CRL PD and PDT Series Metal Bond Diamond Drills use a special diamond and brass bond for maximum performance in glass. Metal Bond Drills offer the longest life of any type of diamond drill; 1,000 to 2,000 holes in 1/4" (6.4 mm) glass with proper maintenance and the use of a wet Sharpening Stone to expose fresh diamonds. These Italian made multi-layer drills cut faster and run cooler than any other drill on the market. They have a full 3/8" (10 mm) deep cutting surface filled with diamonds and bronze bond, which allows for extended drill life, but also makes this style of drill more fragile. They should always be used in true running machines on flat glass surfaces. The CRL PD Series features an extra long 1-3/8" by 3/8" (35 by 10 mm) diameter shank for a positive grip on the drill. The CRL PDT Series features Belgian style mounting threads (also known as 1/2" (12.7 mm) gas thread), which are popular among all U.S. and European glass drilling machines. They can be used in portable drill machines such as the CRL AMZ1,but they are especially suited for production equipment.
NOTE: Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupt Device (Cat. No. GF1) must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury. Important Notes: Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
ProductSiteLaunchDate : 2010-02-17T05:11:34.376Z
Size : 6.0mm
StreetDate : 2014-11-20T00:00:01Z
Style : 9/16" (14.3 mm)
SupplierDeclaredDgHzRegulation : unknown
SurfaceRecommendation : Glass,Metal,Stone
SurfaceRecommendation1 : Polyvinyl Chloride
SurfaceRecommendation2 : Acrylic
UnitCount : 1
UnspscCode : 27111700