Cart 2 india

Specification
Brand : AMPEC
BulletPoint1 : CSA208-24 Insert Ball Bearings are used in Agricultural Machinery, Conveying Equipment, Packaging, Shaft Supports, Food Processing, Grinding and Mixing Equipment, Extrusion, Bagging, Mining, Textile Machinery, Material Handling and in the Printing Industry.
BulletPoint2 : CSA208-24 The bearing can be easily replaced with various interchangeable models, including RA108NPP, FHR208-24, KHR208-24, AELS208-024N.
BulletPoint3 : CSA208-24 These bearings have a Inner Diameter 1-1/2", Outer Diameter 80mm, Width 18mm
BulletPoint4 : CSA208-24 This bearing, made from tough and durable Chrome Steel SAE-52100, is built to last. It comes pre-lubricated with grease.
IncludedComponents : Cam Follower Sealed Bearing
ItemName : CSA208-24 Eccentric Bore 1-1/2 Insert Ball Bearing
ItemTypeKeyword : insert-bearings
Manufacturer : AMPEC
Material : Alloy Steel
NumberOfItems : 1
PartNumber : CSA208-24
ProductDescription : CSA208-24 Cylindrical Insert Ball Bearing is an Eccentric Bore Light Duty Insert Ball Bearing with a Cylindrical Outer Race Locking Collar. The locking collar has been equipped with two Set Screws to tighten onto a shaft. CSA208-24 insert bearing is self-aligning for standard load capacity and features a drilled hole in the groove on the locking collar side and a drilled oil hole opposite the collar to make it interchangeable with all manufacturers. CSA200 Insert Bearings can also be a replacement bearing for many Pillow Blocks, 2-Bolt Flanges, 3-Bolt Flanges, 4-Bolt Flanges, and Take-up units. It can also be cost efficient for replacing the insert bearing instead of replacing the whole unit which can be costly. Our Insert Ball Bearings come in a variety of configurations for various duty strength utilizations come Pre-lubricated with Grease to allow them to be ready to use upon arrival. CSA208-24 Insert Ball Bearings are used in Agricultural Machinery, Conveying Equipment, Packaging, Shaft Supports, Food Processing, Grinding and Mixing Equipment, Extrusion, Bagging, Mining, Textile Machinery, Material Handling and in the Printing Industry.
ProductSiteLaunchDate : 2012-09-26T17:05:10.730Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1