Cart 2 india

Specification
AgeRangeDescription : adult
Brand : DVOGIFJG
BulletPoint : Inductors
Color : Input 500 Ohm
ExternallyAssignedProductIdentifier : 7610054026531
ItemName : DVOGIFJG 0-1KΩ 0-10KΩ 0-20KΩ 0-50KΩ Potentiometer Signal Sensor 1-5V Signal Displacement Transmitter DC24V(Input 500 Ohm)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-inductors
Manufacturer : DVOGIFJG
ModelName : DVOGIFJG
ModelNumber : DVOGIFJG
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : DVOGIFJG
ProductDescription : Inductors
VDT-9020 2-wire resistance signal and 3-wire potentiometer signal sensor transmitter
Working Principles
The sliding resistance signal is received on site and converted into standard signals such as 4-20MA, 0-10V, 0-5V, which are linear with the resistance value. The output signal is directly sent to PLC, DCS, inverter or other secondary instruments, including sensor constant voltage source.
Channel Design
1 in 1 out
Input three-wire potentiometer signal 0-100K supports customization
Input 2-wire resistance signal 0-1K, 0-10, 0-20, 0-50, 0-100 Support customization
If your resistance signal is more than 1K, you can try our WS9050R.
Technical Parameters
Input excitation voltage: 2.5V or 5V
Basic accuracy: 0.2%,
Temperature drift: 0.005%
Withstand voltage: 1500V/1min between the three
Working temperature: -20-50 degrees
Output load:
When the output current is less than or equal to 500, it drives the back-end device. If it is 650, 750 or more, it will not drive, and there will be no output signal. The smaller the resistance, the better.
The output voltage is greater than or equal to 10K, and the output voltage of the back-end device resistance is 10K. If there is no resistance, the minimum is 2K. The larger the resistance, the better.
ProductSiteLaunchDate : 2024-08-03T03:58:58.522Z
Size : Output 1-5V
UnitCount : 1
UnspscCode : 52140000