Cart 2 india

Specification
Brand : Telemecanique Sensors
BulletPoint1 : Inductive Proximity Sensor
BulletPoint2 : Inductive Proximity Sensors detect metal targets only (in close proximity to the sensor)
BulletPoint3 : Non-contact detection
BulletPoint4 : Country of origin: France
ExternallyAssignedProductIdentifier : 4793392477487
ExternallyAssignedProductIdentifier1 : 785901316473
ExternallyAssignedProductIdentifier2 : 0785901316473
ExternallyAssignedProductIdentifier3 : 00785901316473
ItemName : Telemecanique Sensors XS4P30MB230 Inductive Sensor, 240 Vac, 300 Ma, Xs
ItemPackageDimensions_Height : 4.064 centimeters
ItemPackageDimensions_Length : 12.7 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : inductive-proximity-sensors
Manufacturer : Telemecanique Sensors
Material : Metal
ModelNumber : XS4P30MB230
NumberOfItems : 1
PartNumber : XS4P30MB230
ProductDescription : Electrical parameters: JSN-SR04T

Operating voltage: DC 5V

Quiescent current: 5mA

Total current work: 30mA

Acoustic emission frequency: 40khz

Farthest distance: 4.5m

Blind: 25cm

Wiring: + 5V (positive power supply)

Trig (control side) RX

Echo (the receiver) TX

GND (negative)

Module size: 41mm * 28.5mm

Resolution: about 0.5cm

Angle: less than 50 degrees

Working temperature: -10 ~ 70 °

Storage temperature: -20 ~ 80 °

Product
Features:

1, small size, easy to use;

2, low voltage, low power consumption;

3, high accuracy;

4, strong anti-jamming;

5, integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions.

Application:

1, Horizontal distance;

2, obstacle avoidance, automatic control;

3, the object approaches, there is a perceived

4, traffic control;

5, security, industrial control;

6, artificial intelligence, and research

The basic working principle:

(1) using IO port TRIG trigger location, to the high level signal of at least 10us;

(2) module automatically sends 8 40KHz Fang Bo, automatic detecting whether a signal return;

(3) a signal return, a high level is output through the IO port ECHO, the time duration of the high level is

ultrasonic from launch to return. The test distance = (high level time * speed of sound (340M/S)) /2;

This module uses the simple method, a control port with a 10US above high level, can wait for high level

output at the receiving port. An output can drive the timer, when this port is low can read the timer value,

this time for the location of the time, can be calculated distance. So constantly cycle test, that can achieve

the measurement of the value of your mobi
ProductSiteLaunchDate : 2013-05-07T15:29:15.035Z
StreetDate : 2017-05-15T00:00:01Z
Style : Modern