Cart 2 india

Specification
Brand : Fabater
BulletPoint1 : Large Battery Capacity: This instrument has 2000mah battery capacity, long battery life. ABS material, strong and sturdy.
BulletPoint2 : Principle: The instrument uses the principle of laser scattering to accurately measure the number and quality of different particle sizes in the air per unit volume
BulletPoint3 : Fast Test Speed: Designed to detect the number of dust particles per unit volume in a clean environment, with many functions, high test accuracy, fast speed, easy to carry
BulletPoint4 : Real Time Recording: A sampling can measure the dust particle number of six particle sizes at the same time, and the detection results can be recorded in real time, which can be used for research, detection and evaluation of various environments
BulletPoint5 : Widely Used: Can be widely used in microelectronics, medical pharmaceutical, biochemical products, food hygiene, cosmetic products, highly accurate machinery, fine chemical industry and other departments
IncludedComponents : No
ItemName : Air Quality Detector, Essential Air Particle Meter PM2.5 PM10 Air Quality Tester for Indoor & Outdoor Air Pollution Detection, Particle Counter for Cars, Homes, Schools
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 25 centimeters
ItemPackageDimensions_Width : 19 centimeters
ItemTypeKeyword : indoor-air-quality-meters
Manufacturer : Fabater
ModelName : Fabaterfsdgv3o6p9
ModelNumber : Fabaterfsdgv3o6p9
NumberOfItems : 1
PartNumber : Fabaterfsdgv3o6p9
ProductDescription : Spec:
Item Type: Dust Particle Counter
Material: ABS
Weight: Approx. 596g / 21oz
Product Size: Approx. 18.3x7cm / 7.2x2.8in
Particulate Matter Detection Range 0.3μm to 10μm
Particle Size :0.3μm, 0.5μm, 1.0μm, 3.0μm, 5.0μm, 10μm
Counting Efficiency :0.3μm 50%, Greater Than 0.5μm 100% (According for ISO 21501 4 and JIS)
Particle Size Resolution: 0.5 mmSampling Rate :2.83l/min (0.1ft³)
Battery Type: Lithium Battery (Shipped with Built in Battery)
Battery Model: None
Battery Capacity: 2000mah

How to Use:
Operating instructions:
1. Digital temperature and humidity sensors.
2. Sampling air intake, pay attention to use do not plug.
3. LCD display.
4. Mute button: Turn on or off the alarm sound. The default is to turn on sound.
5. Measurement start button: In passive measurement mode, start measurement. Menu Settings, move the cursor up and increase the value.
6. Power button: Long press for 2 seconds to turn on or off the power.
7. Temperature unit selection button: Celsius and Fahrenheit conversion.

PackageList:
1 x Dust Particle Counter
1 x Storage Box
1 x USB Data Cable
1 x English Instruction Manual

Notice:
1. It should be used in a clean environment to prevent damage to the laser sensor.
2. do not disassemble the instrument or put it into the fire.
3. prevent the instrument from violent vibration and falling.
4. Do not let liquid into the instrument.
6. when the machine into different environmental temperatures, especially from the low temperature environment into the high temperature environment, the water may dew on the instrument, must be stable for half an hour, then power, to measure the values. No water, solution or other liquid shall enter through the sampling air intake.

ProductSiteLaunchDate : 2024-07-04T04:10:04.221Z