Cart 2 india

Specification
Brand : ELITE.CITI
BulletPoint1 : GT 150 Series Male & Female Terminals (pack of 20) Gauge 18 16 GA ( APTIV Part # 12191819, 15326269 )
BulletPoint2 : (20 Female, 20 Male, Cable Range 1.00 - 0.75 mm2, Cable Insulation Range 2.25 - 1.70 mm
BulletPoint3 : For heavier usage, use a tool that performs both crimps at the same time.
BulletPoint4 : A proper crimping tool is required.
BulletPoint5 : Temperature Rating: -60F (-51C) to 257F (125C)
Color : Silver
ConnectorType : Screw
ExternallyAssignedProductIdentifier : 9331543507215
IncludedComponents : inc
ItemName : 20 Pair-(16 18 GA) 15 Amp, GT 150, GT-150 Series Male & Female Terminals
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : idc-electrical-terminals
Manufacturer : ELITE.CITI
Material1 : Brass
Material2 : Alloy Steel
MaximumVoltage : 250 volts
MeasurementSystem : Imperial
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelNumber : LW-03
NumberOfItems : 12
OperatingVoltage : 250 volts
PartNumber : 127,125x20
ProductDescription : "

Twining

You don't have to entangle all the copper wires so that you may unravel the additional branches later and cut the brass wires so that the length of the brass wires is insufficient to connect.

Colored Levers

butt terminal wire connector each wire connector is provided with 2 slots and 2 clasps on two sides, can be used in splicing. help with tracing wires and assorting wires in a clear and easy way.

Save Space

Compact size is invaluable for all connection space requirements, offering you a clean and beautiful wire organization.

Practical Lever Wire Nuts

Used for building and everyday household wiring: lights, sockets, switches, cars, loudspeakers, electrical boxes, fan controls, etc.

Rated Voltage: 250V/600V

Rated Current: 32A

Guide Strip: copper

Spring: Steel

Package includes:

12 PCS Orange 1 in 3 out Electrical wires Connector

Range of Uses :Wire Cross section 0.08~4.0mm²(hard wire ), 0.08~2.5mm²(soft wire)

How to use:

Open the housing of wire to 0.39inch (10mm);

Push the lever to 90° and insert the wire lead;

Press the lever to close the clamp;

Check the test hole whether it is connected correctly. electrical connections.

"
ProductSiteLaunchDate : 2019-02-15T01:55:22.260Z
SpecificationMet : UL
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureRating : 257 degree fahrenheit
TerminalType : Screw Terminal
UnitCount : 50
UnspscCode : 39121400
Voltage : 250 volts
Voltage1 : 250 volts
Voltage2 : 600 volts