Cart 2 india

Specification
BulletPoint1 : 37/50/100ML Stainless Steel Paint Density Specific Gravity test Cup Liquid PycNameter for Paintwork Coating Density Determiner Pycnometer for Coatings Auxiliary Materials
BulletPoint2 : It is used to measure the mass in a unit volume of a certain liquid at a certain temperature (that is specific gravity) .
BulletPoint3 : The instrument includes a cylindrical container with a small hole for discharging excess test fluid.
BulletPoint4 : Cylindrical, large opening, easy to pour everywhere, easy to clean.
BulletPoint5 : Suitable for measuring the specific gravity of various coatings and auxiliary materials, oil and other liquids.
Capacity : 35 milligrams
Color : 100ml
ExternallyAssignedProductIdentifier : 7415232927316
ItemDisplayWeight : 300 grams
ItemName : 35/50/100ML Stainless Steel Paint Density Specific Gravity Test Cup Liquid PycNameter for Paintwork Coating Density Determiner Pycnometer for Coatings Auxiliary Materials (100ml)
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : science-lab-hydrometers
Manufacturer : Gravity test Cup
Material : Stainless Steel
NumberOfItems : 1
PartNumber : 1
ProductDescription : The specific gravity cup is suitable for measuring the specific gravity of various coatings, auxiliary materials, oils and other liquids.
Its volume is divided into three types: 37ml, 50ml and 100ml.
The density cup is cylindrical and has a large opening for easy pouring and cleaning.
The tight stainless steel cover of the density cup has an upward slope to the small hole in the center of the top, so that excess sample material can overflow without generating bubbles, which can increase accuracy.

How to use
01. Weigh and record
The clean air in the gravity cup is placed on the pan, and record the weight proportion of the cup, and then peeled normalized 0.00g
02 Adjust the temperature
Place the pycnometer on a horizontal table to adjust the temperature of the pycnometer and the sample to be tested (20 ± 0.5 ℃ / 68 ± 1.0 ℉). It can also be selected according to different test materials: (23 ± 0.5 ℃)
03. Pour in the sample
Introduce the test sample into the pycnometer. Tilt-free lid, to avoid air bubbles
04. Wipe the liquid
Wipe excess liquid from the lid and cup wall with absorbent paper towels or cloth.
05. Accurate measurement
Weigh the cup filled with the proportion by weight of the test specimen, the test results show the specific gravity of the cup size precision error range: ± 1 or 10mg
Product packaging
This product is packed in a pressure-resistant hard paper tube to prevent damage during transportation. Both ends of the paper tube have super-sealed covers, and the packaging area is small to carry
ProductSiteLaunchDate : 2020-11-11T16:01:50.362Z
UnspscCode : 41000000