Cart 2 india

Specification
Brand : Chief
BulletPoint1 : SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 10 GPM, 3 position spring center and 4 position float, SAE 10 inlet and outlet ports and SAE 8 work ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI.
BulletPoint2 : VERSATILE: This G series P40 DCV has a 3 position spring center and 4 position float that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit.
BulletPoint3 : PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 10 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters.
BulletPoint4 : MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system.
BulletPoint5 : TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation.
Color : Black
CustomerPackageType : Standard Packaging
ExteriorFinish : Oxide Finish,Steel,Zinc
ExternallyAssignedProductIdentifier1 : 0615986024805
ExternallyAssignedProductIdentifier2 : 615986024805
IncludedComponents : Closed Center Plug
ItemName : Chief G Series P40 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 2 Spool, 10 GPM, 3 Position Spring Center and 4 Pos Float, SAE 10 Inlet and Outlet, SAE 8 Work Ports, 3625 PSI
ItemPackageDimensions_Height : 15.24 centimeters
ItemPackageDimensions_Length : 0.254 centimeters
ItemPackageDimensions_Width : 10.922 centimeters
ItemPackageQuantity : 1
ItemShape : Monoblock
ItemTypeKeyword : hydraulic-directional-control-valves
Manufacturer : Bailey Hydraulics
Material : Cast Iron
Material1 : Zinc
Material2 : Carbon Steel
MaximumOperatingPressure : 3600 pounds_per_square_inch
ModelNumber : 660312005
NationalStockNumber : 4820-01-519-2217
NumberOfItems : 1
NumberOfPorts : 3
PartNumber : 220956
ProductDescription : The Chief G Series P40 Directional Control Valve is designed to control the direction of flow of fluids in hydraulic systems with precision and reliability. Our directional control valve has 4 ports and allows three spool positions: extend, retract, and neutral. Along with a maximum working pressure of 3625 PSI, this DVC has a wide variety of uses in operating double-acting hydraulic actuators in cramped spaces with limited maneuver capacity. With a 10 GPM flow rate, the control valve works very well in both heavy and light applications. The P40 directional valve has a spring tandem center. So, you can clamp your hydraulic actuator in many different positions. It allows fluid flow back to the circuit without passing it over the relief valve. Therefore, there is no excess heat or noise generation. This DVC is low maintenance and long-lasting. The Chief G Series P40 directional control valve has 2 spool, 10 GPM, 4 ports, 3 position spring tandem center with SAE 10 outlet, and SAE 8 work ports. It has a maximum working pressure of 3625 PSI and can withstand temperatures of up to 176 degrees Fahrenheit. Try Chief’s for your hydraulic circuits and experience the difference it makes to your daily operations. We’re sure there’ll be no going back.
ProductSiteLaunchDate : 2016-08-18T23:58:31.250Z
Size : 1 Spool 13 GPM
SpecificationMet : sae
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : Lift Check Valve
Voltage : 900 volts