Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : Generic
BulletPoint1 : Superior Quality: This spindle kit undergoes strict quality testing, withstanding a heavy load of 2000 pounds
BulletPoint2 : Wide Compatibility: This spindle kit Specially designed for 1-1/16 inch straight spindles, compatible with most trailer axle models
BulletPoint3 : High Safety: This spindle is tightly connected to the wheel hub through bolt fastening, avoiding the condition of bolt loosening during driving
BulletPoint4 : Easy to Install: This spindle kit just requires a torque wrench to be prepared, users use it to install the spindle kit
BulletPoint5 : Low maintain cost: This spindle kit has low maintenance cost and cleaning steps. After a simple cleaning, it can be used multiple times
FitType : Universal
IncludedComponents : 2* Hub kits; 2* Tapered spindles; 2* Pins; 2* Washer; 2* Cap; 2* Grease Seal; 2* Castle nut; 4* Bearings; 8* Lug nuts;
ItemName : 5256605 52-56605 Fit Splined Hub Quick Disconnect 52-56605
ItemPackageDimensions_Height : 8.19 inches
ItemPackageDimensions_Length : 14.29 inches
ItemPackageDimensions_Width : 6.4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : trailer-hubs
Manufacturer : FastRepair
ModelName : Does Not Apply
ModelNumber : JE-037892-319780-CU
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 12A1c3
ProductDescription : fit splined hub for better
Any play in the - including the hub - takes by the driver letting the car 'wander around'. This hub has a micro-finished spud and Hard Anodized splined hub for a super fit, yet is easy to remove and install.
Plus, there are sets of mounting holes so you 'clock' your wheel 3 times closer.
For there are 2 sets of retaining grooves. If you don't get the ring engaged it will catch on the second groove rather than come on the track.
The 'spuds' be installed on both 3/4" and also 5/8" shafts.
hub - pull ring release with double grooves
Welds to 3/4" or 5/8" shaft
Aluminum hub
3 Mounting holes “ 5/16" on a 1-3/4" -hole distance 1-1/2" center-to-center-
Weight: .85 lbs. including
-WILL NOT FIT 290mm and 320mm flat suede wheels - PNs 56911 & 56913-
ProductSiteLaunchDate : 2025-04-07T12:48:58.809Z
SupplierDeclaredDgHzRegulation : transportation
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
WarrantyDescription : Does Not Apply