Cart 2 india

Specification
Brand : StanceMagic
BulletPoint1 : StanceMagic Hub Centric Rings made of CNC Machined billet aluminum. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
BulletPoint2 : HUB RING INNER DIAMETER: 87.1mm (Your vehicle's hub lip diameter needs be this size)
BulletPoint3 : HUB RING OUTER DIAMETER: 108mm (Your wheel's center bore needs to be this size)
BulletPoint4 : Compatible with Ford 1997-2023 F150 F-150. Compatible with Ford 1997-2014 Expedition. Compatible with Lincoln 1998-2014 Navigator, 2006-2008 Mark LT.
BulletPoint5 : IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
Color : Silver
FabricType : PP
FitType : Vehicle Specific
IncludedComponents : Hubrings
ItemName : StanceMagic Hubcentric Rings (Pack of 4) - 87.1mm ID to 108mm OD - Silver Aluminum Hubrings - Only Works on 87.1mm Vehicle Hubs and 108mm Wheel Centerbore
ItemPackageDimensions_Height : 0.5 inches
ItemPackageDimensions_Length : 7.5 inches
ItemPackageDimensions_Width : 7.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hub-centric-rings
Manufacturer : StanceMagic
Material : Aluminum
ModelName : Hubrings
ModelNumber : KJII5030C9F01WN477XS
NumberOfItems : 4
PartNumber : AL-HR-87.1>108
ProductDescription : WHAT ARE HUB CENTRIC RINGS?
(Also called hubrings, hubcentric rings, centering rings)
This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.

WHY DO I NEED IT?
You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.

HOW CAN I CONFIRM FITMENT?
- Hubrings have 2 measurements, typically in millimeters (mm).
- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 87.1mm. This should match your vehicle's hub bore.
- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 108mm. This should match your wheel's centerbore.


VEHICLE FITMENT
These hubrings are compatible with Honda and Acura vehicles with a 87.1mm Hub. Your Wheel Bore must be 108mm. Message us with year/make/model if you have any fitment questions.

IMPORTANT NOTES - BUYERS ARE REQUIRED TO CHECK BEFORE PURCHASING
- Buyers must ensure their Vehicle's Hub is 87.1mm.
- Buyers must ensure their Wheel's Centerbore is 108mm.
- If you are not unsure about fitment or the measurements, please do not guess. Send us a message and we are happy to help.

INSTALLATION ADVISORY
Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.
ProductSiteLaunchDate : 2024-08-07T18:13:23.859Z
Size : 87.1mm ID to 108mm OD
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000
WarrantyDescription : 1-Year Limited Warranty covering manufacturing defects