Cart 2 india

Specification
Brand : MHBXYZ
BulletPoint1 : 45° Mitre Clamp is mainly use for the (man-made and natural), or other similar sheet of 45 stitching. Since its launch, with high quality and innovative ideas, best-selling home and abroad, welcome customers to purse.
BulletPoint2 : When two workpieces are processed into a 45 edge bevel, then clean the 45 face of workpiece, evenly coated with adhesive, then put two workpiece of 45 bevel face assembling together, and the two 45°workpiece fit into a 90 with each other, use the fixture in plastic extrusion seam stitching.
BulletPoint3 : First, put the bottom of width stone on the fixture work surface which with white rubber, the side of the narrow stone close to the 90 inside of the fixture.
BulletPoint4 : Then two binder lever can be adjusted by adjusting spring device access to the top position of the workpiece,then rotating the screw at the top of the binder lever to put pressure in place to maintain the fixture locked position for a certain time, until the workpiece fully bonded joints, solid, and then release the fixture.
BulletPoint5 : Can be used to manufacture artificial stone/quartz, granite, marble, quartzite, glass, ceramics, concrete, etc.
Color : Red
ExternallyAssignedProductIdentifier1 : 0756804459178
ExternallyAssignedProductIdentifier2 : 756804459178
IncludedComponents : 45 Degree Miter Clamp
ItemDisplayDimensions_Height : 1.57 inches
ItemDisplayDimensions_Length : 4.72 inches
ItemDisplayDimensions_Width : 4.33 inches
ItemDisplayWeight : 0.36 pounds
ItemName : 45 Degree Miter Clamp, Countertop Corner Clamp System Granite Marble Stone Glue Install Tools, Countertop Seam Splicing Fixture Plate Mounting Tool Clamp
ItemPackageDimensions_Height : 1.97 inches
ItemPackageDimensions_Length : 5.12 inches
ItemPackageDimensions_Width : 4.72 inches
ItemTypeKeyword : horizontal-hold-down-clamps
Manufacturer : MHBXYZ
Material : Metal
ModelName : 45 Degree Miter Clamp
ModelNumber : 45 Degree Miter Clamp
PartNumber : HN33SGKU31A09FY
ProductDescription :

Specification

Maximum clamping height:13cm

Size:32x20cm

Weight:2.25kg

 

• 1. 45° Mitre Clamp is mainly use for the (man-made and natural), or other similar sheet of 45 stitching.  Since its launch, with high quality and innovative ideas, best-selling home and abroad, welcome customers to purse.

• 2. When two workpieces are processed into a 45 edge bevel, then clean the 45 face of workpiece, evenly coated with adhesive, then put two workpiece of 45 bevel face assembling together, and the two 45°workpiece fit into a 90 with each other, use the fixture in plastic extrusion seam stitching.

• 3. First, put the bottom of width stone on the fixture work surface which with white rubber, the side of the narrow stone close to the 90 inside of the fixture.

• 4. Then two binder lever can be adjusted by adjusting spring device access to the top position of the workpiece,then rotating the screw at the top of the binder lever to put pressure in place to maintain the fixture locked position for a certain time, until the workpiece fully bonded joints, solid, and then release the fixture.

ProductSiteLaunchDate : 2024-12-19T08:06:37.479Z
Size : 12X11cm
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31162900