Cart 2 india

Specification
Brand : ULTRAVEN
BulletPoint1 : Heat-resistant
BulletPoint2 : Autoclavable
BulletPoint3 : Corrosion-resistant
BulletPoint4 : Probes with asmall radiation surface are recommen.ded for sonication of samples in smal, slim vesselsnever for samples larger than 50 ml. These probeswork with high intensity and are therefore designedfor a short sonication time. Probes with a small radiation surface(also known as micro tips)in particulagenerate a very high level of heat in small volumesn the case oftemperature-sensitive samples, worshould be carried out in pulsed mode or the sampleshould also be cooled.
BulletPoint5 : Larger volumes require a larger probe radiation surfaceFor example,a 38 mm probe is more suitable for soni-cating a 1 litre sample volume than a 25 mm probe.
Color : One Color
ExternallyAssignedProductIdentifier : 7426932259287
ExternallyAssignedProductIdentifier1 : 0795490850371
ExternallyAssignedProductIdentifier2 : 795490850371
IncludedComponents : Probe
ItemName : Probe Φ6,ultrasonic Probe,Standard Probe,Sonicator Probe,Ultrasonic Processor Probe, Titanium Alloy Ti-6Al-4V
ItemPackageDimensions_Height : 7 inches
ItemPackageDimensions_Length : 14 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-homogenizer-accessories
Manufacturer : Swif Lab (CALIFORNIA SOLEPROPRIETORSHIP)
Material1 : Metal
Material2 : Metal
Material3 : Metal
Material4 : Metal
Material5 : Metal
ModelName : 18900142
ModelNumber : Φ6
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : UH-100-001P4
PowerSourceType : corded-electric
ProductDescription :

Clamps for Vortex Dream Mat & Dredge Mat

Available in 6", 8", 10" and 12".

These clamps can be used to install your new Dream Mat into your DIY sluice, or if you are retro fitting the Dream mat into an existing sluice, highbanker or dredge.

Drill your own holes, use a simple pan head screw & a wing nut to hold it down. Clamps are 1/8" shorter than box with so not to bind.

ProductDescription1 : They transmit the mechanical vibrations into the sample. The radiating surface is only at the tip, not at the sides. A high amplitude means particularly intensive sonication and increased wear on the horn. Due to their geometry, the sonotrodes achieve multiple amplitude amplification and thus achieve the highest ultrasound power densities Features in liquids.
ProductDescription2 : The probes are thermostable, autoclavable and re-sistant to almost all corrosive media. They are madefrom a titanium alloy(TiAl6V4)
ProductDescription3 : The choice of probe depends on several factors: thedesired power density,the sonication volume, theshape and size of the sonication vessel, the ampli.tude and the temperaturesensitivity of the samplet should be noted that the radiation surface is onlyocated at the probe tip and not at the sides.
ProductDescription4 : Depending on the application and process require.ments,one or more factors may be decisive for theselection of the probe.
ProductDescription5 : An approximate sample volume range is recommen.ded for each probe. This is only a guide value. Thevolume to be sonicated is application specific. Forexample,the 13 mm probe, mounted on the DH92-IIN,can be used for around 20-900 m. Depending on thesize and shape of the sonication vessel, it may bedifficult to sonicate a 20 ml volume with the 13 mmprobe; a micro tip may be a better option.The sizeand shape of the sample vessel is therefore anothe!actor when selecting a probe
ProductSiteLaunchDate : 2024-09-20T07:00:00.000Z
Size : Φ18mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41120000
Wattage : 900 watts