Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 1.Easy to install and operate,and easy to connect wired.
BulletPoint2 : 2.Open and close the gate by remote control and keypad.
BulletPoint3 : 3.Time promotation function.when open gate,speed is slow,then a little quick,and when close the door,speed is slow again.
BulletPoint4 : 4.In case of power failure,release the clutch easily,and can operate the gate manually.
BulletPoint5 : 5.Stop working when gate meets with obstacle.
Color : Exit button
ItemName : EM/ID Embedded Door Access Control Intercom Access Control Lift Control with 2pcs Mother Card 10pcs Em Key Fob Min:1pcs (Color : Exit Button)
ItemPackageQuantity : 1
ItemTypeKeyword : home-security-systems
Manufacturer : Lifyn2
Material : metal
NumberOfItems : 1
PartNumber : BFUAFFPC-EXITBUTTON
ProductDescription : Specifications:
.Working Frequency:125KHz
.Power Supply: DC 9~18V
.Current: 60mA~80mA
.Rated Power: ≤ 1W
.Read Range: 3~5cm
.Card Capacity: 2000
.Temperature: <;60 degree
.Humidity: 10% ~ 95% R.H
.Size: 86*34*12mm
.Outdoor Button: 1
.Sensor Input: 1
.Electric Lock Output: 1
.With manage card to add or delete users card
.With IR remote switch to add or delete users card (option)
.Application Field: building intercom,Lift
****************************************************************************************************************************
Add card:
1.swipe the add card, enter add mode ,
2.then swipe the user card one by one,
3.swipe the add card again, quit 'add mode' , add user card succefully.
Delete card:
1.Dele the add card, enter delete mode ,
2.then swipe the user card one by one,
3.swipe the delete card again, quit 'delete mode' , add delete card succefully.
****************************************************************************************************************************************************************
this access control kit congiture Two master card, one add user card,another dele user card,you can use these super cards to add new users or dele old users. so this access control system is very easy to manage!
****************************************************************************************************************************************************************
IR Remote control operation instructions (optional)
Operation method: use the infrared remote control to face the infrared receiver on the access control machine (Remark:factory programming password is 123456).
Use card number to add the user：Input in standby mode #  123456 #   23    Card number (10 digits)   #
Use card number to delete the user：Input in standby mode #  123456 #   43  Card number (10 digits)   #
Read card to add users：Input in stand
ProductSiteLaunchDate : 2023-02-28T06:53:36.206Z
UnitCount : 1