Cart 2 india

Specification
Brand : LANIAKEA
BulletPoint1 : 【HIGH QUALITY】: Carbon steel material; Size Range: 30-200mm dia. Shank Diameter: 3/8 in(10mm). Boring thickness: 1/8-2 inch(3-50mm). Total 2 pair of blades.
BulletPoint2 : 【EASY TO USE】: It’s easy to adjust diameter of hole by locating the inner edges of both blade holders against the graduated scale. When boring by power drill, 1000rpm or under is desirable.
BulletPoint3 : 【USE IN】: the circle holesaw suits for a wide range of Non-metal materials: Wood, plywood, laminate, composite board, ALC, rubber, gypsum board, FRP, PVC,etc.
BulletPoint4 : 【DRILL THICK PLATES】: When drilling a thick plate of 30MM or more, pull the center drill out after the tip comes out to the back side, and cut along the through hole from the back side.
BulletPoint5 : 【CAUTION FOR CIRCLE CUTTER】: ①You must wear eye-protection when using the power tools; ②Start operation after exactly fixing the material; ③Using an adequate motor and fix the motor in operation.
Color : Black-30-200mm
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Aluminum
CompatibleMaterial3 : Metal
ExternallyAssignedProductIdentifier1 : 885363217421
ExternallyAssignedProductIdentifier2 : 0885363217421
ExternallyAssignedProductIdentifier3 : 00008925127925
IncludedComponents : Lenox HOLESAW T3 UA K38L 2 3/8 60MM Clam
IncludedComponents1 : 2-1/16" Hole Saw
IncludedComponents2 : 2-1/16" Hole Saw
IncludedComponents3 : 2-1/16" Hole Saw
IncludedComponents4 : 2-1/16" Hole Saw
IncludedComponents5 : 2-1/16" Hole Saw
ItemName : LANIAKEA 1-3/16 Inch to 7-7/8 Inch Adjustable Circle Hole Saw Cutter 30-200mm Wood Drywall Drill Bit Round Cutting for Home DIYer
ItemPackageDimensions_Height : 29.0068 centimeters
ItemPackageDimensions_Length : 4.0894 centimeters
ItemPackageDimensions_Width : 27.5082 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hole-saws
Manufacturer : LANIAKEA
Material : Carbon Steel
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
ModelName : Lenox HOLESAW T3 UA K38L 2 3/8 60MM Clam
ModelNumber : AF-HOLESAWS
NumberOfItems : 1
PackageLevel : unit
PartNumber : AF-HOLESAWS
ProductDescription : LANIAKEA 1-3/16 Inch Inches to 7-7/8 Inches Adjustable Circle Hole Saw Cutter

Parameters:
✈Material:Carbon steel
✈Hole Dia.: 30mm-200mm
✈Rotation Speed: Less than 1000rpm
✈Boring thickness: 1/8-2inch(3-50mm)
✈Blades: Total 2 pairs

Used in: Non-metal materials, such as Wood, plywood, laminate, composite board, ALC, rubber, gypsum board,
FRP, PVC and so on.

How to drill thick plates?
✈When opening a thick plate of 30mm or more, pull the center drill out after the tip comes out to the back side,
and cut along the through hole from the back side. Max. thickness is less than 50mm.

How to set the drilling size?
✈Size adjustment is done inside the blade holder.
✈If you'd like to cut a 40mm dia hole, check to adjust the holder to the shorter tick marker that is outside 40 marker.

Caution ● Warning
● Always wear goggles when using power tools.
● Do not use on iron plate or metal plate.
● Before starting work, securely tighten each screw before starting work. (Especially tighten the holder screw
and center drill set screw securely.)
● Because the cutting edge is carbide, do not drop or give an impact. (Do not use with a hammer drill)
● Please fix the work material firmly and use it so that the drilling target material and both blades are parallel.
● Please work by placing a base plate so that stable work can be performed when the hole penetrates.
● Do not bring any obstacles within the rotation range of the bar.
●Pay particular attention to the electric drill cord and the hands and feet that hold the work material.
ProductSiteLaunchDate : 2021-04-23T09:55:16.595Z
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=2122323
Size : 1-3/16 Inch to 7-7/8 Inch
Style : Adjustable
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Wood
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Stainless Steel
SurfaceRecommendation3 : Wood
UnitCount : 1