Cart 2 india

Specification
Brand : DEWALT
BulletPoint1 : UP TO 50% LONGER LIFE*: Patented tooth forms optimize chip removal for efficient drilling and long life, *vs. prior generation DEWALT Bi-Metal Hole Saws cutting black pipe
BulletPoint2 : FAST PLUG EJECTION: Large, continuous slot provides leverage for easy plug removal
BulletPoint3 : VERSATILE DRILLING PERFORMANCE: High-speed, steel cutting edge effectively drills through wood, metal, and plastic
BulletPoint4 : DESIGNED FOR THICK MATERIALS: Deeper saw design cuts 2-by material in one pass
BulletPoint5 : MADE IN THE USA WITH GLOBAL MATERIALS
BulletPoint6 : Matrix II Bi-Metal Teeth for greater durability
BulletPoint7 : Positive Rake Angle for fast cutting
BulletPoint8 : Radiused Tooth Back reduces stress on teeth
BulletPoint9 : Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal
Color : Multi
CompatibleMaterial : Brick, Concrete, Cement, Sandstone and Sable-rock
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Wood
CompatibleMaterial4 : Alloy Steel
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 885911630603
ExternallyAssignedProductIdentifier2 : 0885911630603
ExternallyAssignedProductIdentifier3 : 00000346000016
ExternallyAssignedProductIdentifier4 : 00000346375305
IncludedComponents : 1-hole saw
ItemDisplayDimensions_Length : 3 inches
ItemDisplayWeight : 1 pounds
ItemName : DEWALT DAH180026 1-5/8 (41MM) Hole Saw
ItemPackageDimensions_Height : 12.6 centimeters
ItemPackageDimensions_Length : 4.6 centimeters
ItemPackageDimensions_Width : 7.5 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : hole-saws
Manufacturer : DEWALT
Material : Cobalt
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
ModelName : DAH180026
ModelNumber : DAH180026
NumberOfItems : 1
PackageLevel : unit
PartNumber : DAH180026
PowerSourceType : Corded Electric
ProductDescription : Part
6PC Hole saw. 40mm-1.57", 55mm-2.17", 80mm-3.15", 100mm-3.94", 110mm-4.33", 130mm-5.12".
3PC Pilot drill.
1PC Wrench.
3PC Screw.
2PC Shank.

Parameters
1. Shank:
SDS Plus 300mm-11.81"; Thread M22-metric.
SDS MAX 300mm-11.81"; Thread M22-metric.
2. Hole saw depth: 48mm-1.89".
3. Pilot drill diameter: 8mm.
4. Screw: class 12.9.

Notice
1. The hole cannot be drilled with an electric drill, please use an impact drill.
2. Opening hole material: Can not be used for marble, pebbles, and to avoid rebar in cement walls.
3. The object of opening is high-strength concrete and cement slab. The positioning drill of the product will fall off because the vibration of the opening is too large. The solution is as follows: Please use the pilot drill to drill first, and then install the hole opener to make the hole. When the depth reaches 1CM or more, you can remove the positioning drill and keep the hole opener to continue drilling.

Tip
1. When the material of the opening is high-strength concrete or cement board, please use the SDS MAX model for the shank.
2. When you can't drill down, pay attention to check out whether the residue is blocking the hole opener. Please go on opening the hole after the waste has been disposed of.
ProductSiteLaunchDate : 2020-11-19T01:34:11.846Z
Size : One Size
StreetDate : 2019-07-04T00:00:01Z
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Metal
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Wood
UnitCount : 1