Cart 2 india

Specification
Brand : DRILAX
BulletPoint1 : Removable Center Pilot Drill Bit as Locator - Remove the Pilot After Making Initial Ring Mark
BulletPoint2 : Solid Steel Body: Spins True, Cools Better, Lasts Longer
BulletPoint3 : Clean, Precise, Fast, and Dustless Cuts Every Time Standard 3/8" Shank for Standard Drills - No Special Tools Needed
BulletPoint4 : The Pilot Drill Bit is an Initial Locator. It should be removed after making a 1/8 inch marker ring. This ring will be enough to keep the diamond hole saw in position without the pilot bit.
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Porcelain
CompatibleMaterial3 : Wood
CompatibleMaterial4 : Ceramic
ExternallyAssignedProductIdentifier1 : 0850004328736
ExternallyAssignedProductIdentifier2 : 850004328736
ItemName : Drilax 4 Inch Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Kitchen Bathroom Shower Faucet Installation 4 Inches with Removable Center Pilot Drill Bit Locator Pin Locator
ItemPackageDimensions_Height : 10.4902 centimeters
ItemPackageDimensions_Length : 8.7122 centimeters
ItemPackageDimensions_Width : 10.4902 centimeters
ItemTypeKeyword : hole-saw-sets
Manufacturer : DRILAX
Material : Ceramic,Diamond,Porcelain,Quartz,Steel
ModelNumber : DXCHRP010100
PartNumber : DXCHRP010100
ProductDescription :

Solid Steel Body: Spins True, Cools Better, Lasts Longer

Use water for cooling.

Step 1: Start drilling with Center Locator Pilot Pin.

Step 2: After making 1/8 inch depth initial marks, REMOVE THE CENTER PIN

Step 3: Add more water for cooling

Step 4: Continue drilling WITHOUT THE CENTER PILOT BIT

Premium Quality Diamond Hole Saw

Triple-Layer Diamond Coating for Enhanced Performance

Improved Solutions for Diamond Tools

Increased Body Height for Deeper Cuts of 1-3/8 inch "

Clean, Precise, Fast, and Dustless Cuts Every Time

Standard 3/8" Shank for Standard Drills - No Special Tools Needed

Drills Through Toughest Materials

Wet Use with Water for Cooling

Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass

We recommend using water for cooling.
You can start drilling at an angle and go upright.
Or you can cut yourself a template out of scrap wood and clamp the guide to the working surface.

ProductSiteLaunchDate : 2022-06-27T02:47:44.080Z
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable