Cart 2 india

Specification
Brand : Aexit
BulletPoint1 : Designed for drilling 63mm diameter holes
BulletPoint2 : Nickel-plated hole saw drill bit with a diamond debris coating offers superior performance and cutting strength
BulletPoint3 : Excellent for making and accurate hole on glass, tile, ceramic, porcelain, marble and other fragile materials
BulletPoint4 : Cut and round holes to a depth of approximately 30mm
BulletPoint5 : Always use lubrication (water), otherwise the diamond coated drill bit will
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Porcelain
CompatibleMaterial3 : Ceramic
CompatibleMaterial4 : Marble
ItemName : Aexit 63mm Diamond Hole Saws & Accessories Grit Hole Saw Drill Bit for Hole Saw Sets Tile Glass
ItemTypeKeyword : hole-saw-sets
Manufacturer : Aexit
ModelNumber : modle
PartNumber : B01037995
ProductDescription : 1.Coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut with no broken edges.
2.Nickel plated surface makes it more durable. Segmented design works more efficient and lasts longer.
3.Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, granit_e Light Stone (especially for Glass and Tile)
4.Not for use on Concrete.
5.Small incision resistance, increase the speed of cutting holes, easy to and after grooving.
0
How to Drill:
STEP 1: Use pen to mark start of hole, and keep wet with WATER or COOLANT.
STEP 2: Angle drill 45 degrees to start hole, and being drilling at low speeds. Angle drill to vertical position once the hole has started.
STEP 3: Minimum pressure. Slow speed down for exit hole or drill from the other side to prevent breakthrough.
NOTICE: If you smell , back off! Either your speed is too high or the pressure you are applying is too much.
0
Attentions:
1.Always use lubrication(water), otherwise the how saw will .
2.This glass hole saw needs to be used at a low speed, about 800-1000RPM.
3.Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
0
Specifications:
Body Coating: Nickel Plated
Tip Coating: Diamond Plated
Cutting Diameter: 63mm / 2.5-inch
Drilling Depth: 30mm / 1.2-inch
Shank Diameter: 10mm / 0.4-inch
Total Length: 55mm / 2.2-inch
Suggested Drilling Speed: 800-1000/RPM
Package Content: 1 x Glass Hole Saw
ProductSiteLaunchDate : 2018-09-26T09:19:48.596Z
Style : Compact
UnitCount : 1
UnspscCode : 27112700