Cart 2 india

Specification
Brand : Utoolmart
BulletPoint1 : 【Product details】- Punching dia.: 8mm / 0.31-inch; punching length: 40mm / 1.57-inch; shank dia.: 11mm / 0.43-inch; total length: 75mm / 2.95-inch. It is polished, hardened to 52-55HRC
BulletPoint2 : 【Features】- Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
BulletPoint3 : 【Easy To Use】- Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
BulletPoint4 : 【Application】- This paper punch is specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
BulletPoint5 : 【Notice】- If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
Color : 1 pcs
ExternallyAssignedProductIdentifier : 6111622370458
ExternallyAssignedProductIdentifier1 : 662679033989
ExternallyAssignedProductIdentifier2 : 0662679033989
ExternallyAssignedProductIdentifier3 : 00662679033989
FinishType : Brushed
GpsrSafetyAttestation : 1
HandOrientation : Right Hand
ImportDesignation : Made in the USA
IncludedComponents : Unit^Instruction Guide
IncludedComponents1 : 3/16" Drift Punch
IncludedComponents2 : 3/16" Drift Punch
IncludedComponents3 : 3/16" Drift Punch
IncludedComponents4 : 3/16" Drift Punch
IncludedComponents5 : 3/16" Drift Punch
ItemDisplayWeight : 1.2 pounds
ItemName : Utoolmart 8mm/0.31" Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine 1Pcs
ItemPackageDimensions_Height : 13.3 centimeters
ItemPackageDimensions_Length : 2 centimeters
ItemPackageDimensions_Width : 6.2 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : hand-tool-hole-punches
Manufacturer : Utoolmart
Material : Metal
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
MeasurementSystem : Inch
ModelName : J9634B
ModelNumber : UT190919Z-0032
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : UT190919Z-0032
Pattern : Solid
PowerSourceType : hand_powered
ProductDescription : Utoolmart Paper Punch Drill, Straight Shank Hollow Bit Tool

Information
* 1. When drilling, the drilled holes must not be repeated again. Otherwise, the drilled holes cannot be rounded, and the inside of the drilled holes will be blocked by paper scraps.
* 2. Reasons for the blockage of punch drills: Papers are not tidy and uneven; gaskets are not put in right place or lubrication are not enough etc.; punched papers cannot be punched repeatedly; If the drilling size is small, the pressing rod speed should be slower; the drilling time is too long; the thickness of the drilling paper is too thick.
* 3. Please wear work clothes and protective glasses to prevent the skin and eyes from being injured. Heat is generated during the drilling process. When the product is rotating, it is strictly prohibited to touch it by hand.
* 4. Straight shank (H): Installed on the machine with screws (need to be screwed). Easy to disassemble.

Wide Applications
* Widely used in punching tags, photo albums, wall & desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
* The stacking thickness of the offset paper should be 80% of the punching thickness, 60% for base paper, 40% or less for grease film or glazing paper. For example: drill bit with 6mm punching diameter and 50mm punching length (thickness). The total thickness of offset paper to be drilled should be 40mm; the master paper or base paper should be 30mm; and the film or glazing paper should be less than 20mm.

Technical Parameters
Product Name: Hollow Paper Drill
Feature: Straight Shank
Main Color:Silver + Black
Punching Diameter: 8mm / 0.31-inch
Punching Length: 40mm / 1.57-inch
Shank Diameter: 11mm / 0.43-inch
Total Length: 75mm / 2.95-inch
HRC :52-55

Package Content
1pcs x Hollow Paper Drill
ProductSiteLaunchDate : 2019-09-23T02:30:06.129Z
SheetCount : 1
Size : Straight shank 8mm
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 44101602