Cart 2 india

Specification
Brand : BENCH WIZARD
BulletPoint1 : MOST POPULAR SIZES: 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8 and 1-1/4 Inches
BulletPoint2 : SUPERIOR CONSTRUCTION: Includes a solid hard rubber stand to hold the entire set, diameter of the stand is approximately 7-1/4 inches - keep your work space nice and organized with this set. Constructed of hardened steel metal for long lasting durability.
BulletPoint3 : LEVER TO CLAMP METAL: The handle turns to open and close the gap between the plates
BulletPoint4 : GREAT USE: For non-ferrous/ soft metal up to 18 gauge such as gold, silver, copper, brass, etc.
BulletPoint5 : EASY TO USE: The punches are machined flat and smooth at the cutting end to create perfect circle-shaped blanks every time, and beveled at the other end for use with a heavy mallet or hammer. To use the disc cutter, remove all punches from the block, and select the size punch you would like. Place your sheet metal in the slot and place your punch, sharp side against the metal, in the correct slot. Strike the beveled side of the punch with a heavy mallet until it pierces through the sheet metal.
Color : silver
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0768537433349
ExternallyAssignedProductIdentifier2 : 768537433349
HoleCount : 2
IncludedComponents : Perfect Punch Accessory Hole Puncher
ItemName : BENCH WIZARD 10 Piece Circular Disc Cutter | Round Plate W/Handle for Lifting | Includes Large Round Punch Sizes 1/8" to 1.25" | Heavy Duty Hardened Steel | Cuts Up to 18 Gauge
ItemPackageDimensions_Height : 1.2 inches
ItemPackageDimensions_Length : 5.5 inches
ItemPackageDimensions_Width : 2.9 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-hole-punches
Manufacturer : HAWK
Material : Multi
Material1 : metal
Material2 : steel
ModelNumber : G-00698
NumberOfItems : 1
OperationMode : Manual
PartNumber : B01ELXQ5IC
ProductDescription : BENCH WIZARD 10 Piece Circular Disc Cutter | Round Plate W/Handle for Lifting | Includes Large Round Punch Sizes 1/8" to 1.25" | Heavy Duty Hardened Steel | Cuts Up to 18 Gauge. MOST POPULAR SIZES: 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8 and 1-1/4 Inches. SUPERIOR CONSTRUCTION: Includes a solid hard rubber stand to hold the entire set, diameter of the stand is approximately 7-1/4 inches - keep your work space nice and organized with this set. Constructed of hardened steel metal for long lasting durability. LEVER TO CLAMP METAL: The handle turns to open and close the gap between the plates. GREAT USE: For non-ferrous/ soft metal up to 18 gauge such as gold, silver, copper, brass, etc. EASY TO USE: The punches are machined flat and smooth at the cutting end to create perfect circle-shaped blanks every time, and beveled at the other end for use with a heavy mallet or hammer. To use the disc cutter, remove all punches from the block, and select the size punch you would like. Place your sheet metal in the slot and place your punch, sharp side against the metal, in the correct slot. Strike the beveled side of the punch with a heavy mallet until it pierces through the sheet metal.
ProductSiteLaunchDate : 2016-07-17T17:32:43.846Z
SheetCount : 40
Size : One Size
Style : 1/4 Inch - Numbers Merc
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1