Cart 2 india

Specification
Brand : ASSORTS
BulletPoint1 : This Assorts' Ball and Radius Turning Tool is designed to cut round shapes or curves in brass, aluminum, steel or plastic on your small lathe machine..
BulletPoint2 : You can also make ball joints, governor weights, railing knobs, round contact points for tools, nose cones, and many other useful and decorative objects.
BulletPoint3 : The Radius tool is sized for small lathes, although it can be used with any size of equipment. The tool will cut convex curves up to 3/4" in diameter.
BulletPoint4 : The lathe ball turning tool is completely machined from solid metal stock, there are no stamped, cast or pressed parts. A pre-ground High Speed steel tool bit is included.
BulletPoint5 : On most lathes, the Ball and Radius Turning Tool will fit in standard tool holders. The tool is designed so that the center height is 1/4" from the bottom of the shank, so that on lathes like the Sherline or Taig, which use a standard 1/4" tool bit, little or no shimming is needed. On other lathes, the tool can be easily shimmed to center height.
Color : Epoxy Black for Rusting Free
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 9010491796901
FinishType : Epoxy Black
IncludedComponents : 1 Pc of Radius Turning Tool & 1 Pc of HSS Cutting Tool Bit
ItemDisplayWeight : 500 grams
ItemName : Assorts' Radius Ball Turning Tool for Lathe 3/8" Shank with HSS Tool Bit
ItemPackageDimensions_Height : 16.002 centimeters
ItemPackageDimensions_Length : 4.191 centimeters
ItemPackageDimensions_Width : 9.7028 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : lathe-turning-tools
ItemTypeName : lathe tool holder
Manufacturer : Assort Machine Tools Co.
Material : Tool Steel
ModelName : lathe tool holder
ModelNumber : ALRTA-19
NumberOfBoxes : 1
NumberOfItems : 5
PartNumber : ALRTA-19
PowerSourceType : as shown
ProductDescription : This Assorts' Ball and Radius Turning Tool is designed to cut round shapes or curves or balls in brass, aluminum, steel or plastic on your lathe machine * You can also make ball joints, governor weights, railing knobs, round contact points for tools, nose cones, and many other useful and decorative objects. * The Radius tool is sized for small lathes, although it can be used with any size of equipment. The tool will cut convex curves up to 3/4" in diameter. * This lathe ball turning tool is machined from the highest quality of tool steel. The handle has a nicely turned aluminimum ball for easy gripping. * The lathe ball turning tool is completely machined from solid metal stock, there are no stamped, cast or pressed parts. A pre-ground High Speed steel tool bit is included.* On most lathes, the Ball and Radius Turning Tool will fit in standard tool holders. The tool is designed so that the center height is 1/4" from the bottom of the shank, so that on lathes like the Sherline or Taig, which use a standard 1/4" tool bit, little or no shimming is needed. On other lathes, the tool can be easily shimmed to center height.
ProductSiteLaunchDate : 2021-11-02T11:42:10.196Z
Size : Can turn Convex ball upto 3/4" diameter maximum
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2