Cart 2 india

Specification
Brand : WOD Tape
BulletPoint1 : Easy Installation - WOD KPT-1 Heat Transfer Tape is easy to peal, comes off clean, and with no residue, reduces clean-up time and minimizes rejects, ideal for protecting sensitive printed circuit board (PCB) components such as gold leads and fingers during the process of wave soldering, it may be hand-pealed, with a scissor, or utility knife.
BulletPoint2 : 3D Printer Uses - This Cricut Heat Tape is a MUST when printing in shirts, hats, and more. Its polyimide film helps withstand high temperature and makes it conducive for installing on 3D printers with its heated build platforms. It also insulates your print from high voltage wonders experienced during Xerographic printing operations.
BulletPoint3 : High Temperature Resistance - Its adhesive will thermoset to increase adhesion values, when resisting to high insulation, high temperature, acid, alkalines, crocking, and tearing. It will resist up to 200 C. Film meets UL510 and it is formulated to meet spec MIL-P-46112B.
BulletPoint4 : Multi Purpose Applications - WOD KPT-1 Sublimation Tape is suitable for wave soldering shield of electronics, circuit board, motor, coil, capacitor, and transformer insulation. Also, for Masking, splicing wires, and protecting gold contacts from molten solder during hot air wave solder leveling process.
BulletPoint5 : WOD Tape stands as a top-selling brand on Amazon, dedicated to providing only the highest quality tape products. As a USA-based small business, our commitment to excellence extends to both our products and customer service.
Color : Bronze
CompatibleMaterial : Plastic
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Rubber
CompatibleMaterial3 : Metal
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8199568095817
ExternallyAssignedProductIdentifier1 : 742309115718
ExternallyAssignedProductIdentifier2 : 0742309115718
IncludedComponents : no
ItemName : WOD PKT26 Polyimide High Temperature Heat Resistant Silicone Adhesive Tape 1/2 inch x 36 yd. for 3D Printers Platform, BGA Heating, and Electric & Soldering Task
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 0.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : high-temperature-tape
LowerTemperatureRating : -70 degrees_celsius
Manufacturer : Tape Providers
Material : Polyimide
Material1 : Silicone
Material2 : Rubber
ModelNumber : KPTLS-1/2
NumberOfItems : 1
PartNumber : WOD PKT26-AMB
ProductDescription :

Kapton High Temperature Resistant Polyimide Tape

WOD KPT-1 is layered with a high-performance silicone adhesive and polyimide film, which helps it withstand high temperatures, high insulation, acids, and alkalines, which makes it conducive for installing on 3D printers with the heated build platforms, circuit boards, electronics, transformers, and more.
Benefits

• Resists up to 200 C.
• Leaves no residue after removal.
• Easy to peal.
• Tape’s width, not too wide, and not too narrow. 
• Thin, flexible, and tough, it nullifies the changes of getting punctured with sharp edges.
• Resistant to acids, solvents, oils, aging, water immersion, and staining.
• Wide enough to help maintain the alignment and cover your printer's bed.

Applications

• Fiber optics cable protection.
• Automotive manifolds or sensors protection.
• Etching, and circuit boards protection. 
• Cross-over insulation. 
• Conductors bundling.
• Reinforcing insulation.
• Wave solder concealing of printed circuit boards. 
• Electronics screen repair when ghost touching problem.
• Model railroad locomotives insulation.

Properties

• Tape Thickness: 2.6 mil
• Film Thickness: 1 mil
• Adhesion 23.8 oz/in
• Tensile Strength: >20.6 lbs/in
• Elongation: >30%
• Temperature Range: 200ºC (392 ºF)/30 min
• Dielectric Strength: >4000 V
• Film Color: Gold or Amber (Transparent)
• 3" plastic core

ProductSiteLaunchDate : 2019-05-07T04:05:01.954Z
RecommendedUsesForProduct : Plumbing
RecommendedUsesForProduct1 : Electrical
RecommendedUsesForProduct2 : Soldering
RecommendedUsesForProduct3 : Arts And Craft
Size : 1 Roll
Style : width: 1.00 in
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Plastic
TensileStrength : 20 pounds_per_square_inch
UnitCount : 1
UpperTemperatureRating : 392 degrees_fahrenheit
WaterResistanceLevel : waterproof
Wattage : 432