Cart 2 india

Specification
Brand : J.V. Converting
BulletPoint1 : JVCC EGPF-02 Kapton Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high-performance silicone adhesive.
BulletPoint2 : It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures (good for high-temperature masking applications).
BulletPoint3 : Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing.
BulletPoint4 : EGPF-02 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining, and water immersion.
BulletPoint5 : Carrier/Backing: electrical grade polyimide film. Adhesive: high-performance silicone. Thickness: 3.6 mils (carrier, adhesive) 2 mils (carrier). Adhesion: 21 ounces per inch (to stainless steel test panel). Tensile Strength: 21 pounds per inch (longitudinal). Dielectric Breakdown: 7000 volts. Service/Operating Temperature: up to 392F. Elongation: 70%. Standards Met: MIL-P-46112B; UL510 approved for flame retardance. Core: 3-inch diameter plastic.
Color : Amber / Transparent
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Stainless Steel
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 687927075412
ExternallyAssignedProductIdentifier2 : 0687927075412
ExternallyAssignedProductIdentifier3 : 00687927075412
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 3.75 inches
ItemDisplayDimensions_Width : 3.75 inches
ItemDisplayWeight : 0.27 pounds
ItemName : JVCC Kapton Polyimide Film Tape [2 mil] (EGPF-02): 1 in. x 36 yds. (Amber/Transparent)
ItemPackageDimensions_Height : 10.1 centimeters
ItemPackageDimensions_Length : 2.8 centimeters
ItemPackageDimensions_Width : 9.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : high-temperature-tape
Language : english
Manufacturer : JVCC
Material : electrical grade polyimide film
ModelNumber : EGPF-02/AMBT136
NumberOfItems : 1
PartNumber : EGPF-02/AMBT136
ProductDescription :

JVCC EGPF-02 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures (good for high-temperature masking applications). Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. EGPF-02 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.

ProductSiteLaunchDate : 2014-12-10T17:14:55.990Z
Size : 1 in. x 36 yds. (25.4mm wide)
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Plastic
UnitCount : 1
UnspscCode : 31201500
WaterResistanceLevel : water_resistant