Cart 2 india

Specification
Brand : BriskHeat
BulletPoint1 : Width: 0.5in (13mm); length: 120in (3050mm); total watts: 360; voltage: 120VAC
BulletPoint2 : Moisture and chemical resistant silicone rubber makes up the extruded outer sheath
BulletPoint3 : Uniform, fiberglass-reinforced, serpentine-wound multi-stranded heating element is suitable for electrically conductive surfaces
BulletPoint4 : Includes an adjustable thermostat control and a 6ft (2m) long power cord with a 120VAC standard 2-prong NEMA 1-15 plug
BulletPoint5 : Thermostat has a range of 50 to 425 degrees F (10 to 218 degrees C), and the tape can tolerate a maximum exposure temperature of 450 degrees F (232 degrees C)
Color : Brown
CompatibleMaterial : Rubber
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Stainless Steel
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 687927075443
ExternallyAssignedProductIdentifier2 : 0687927075443
ExternallyAssignedProductIdentifier3 : 00687927075443
ItemDisplayDimensions_Height : 0.5 inches
ItemDisplayDimensions_Length : 3.75 inches
ItemDisplayDimensions_Width : 3.75 inches
ItemDisplayWeight : 0.15 pounds
ItemName : BriskHeat HSTAT051010 XtremeFLEX HSTAT Silicone Rubber Heating Tape With Adjustable Thermostat Controller, W x L: 0.5 x 120-Inch, 120VAC
ItemPackageDimensions_Height : 18.9992 centimeters
ItemPackageDimensions_Length : 14.9098 centimeters
ItemPackageDimensions_Width : 18.8976 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : high-temperature-tape
Language : english
Manufacturer : BriskHeat
Material : electrical grade polyimide film
Material1 : Rubber
Material2 : Silicone
ModelNumber : HSTAT051010
NumberOfItems : 1
PartNumber : HSTAT051010
ProductDescription :

JVCC EGPF-02 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures (good for high-temperature masking applications). Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. EGPF-02 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.

ProductSiteLaunchDate : 2014-08-19T13:10:37.928Z
RecommendedUsesForProduct : Indoor, Outdoor, Electrical, Plumbing
Size : 1/2 in. x 36 yds. (12.7mm wide)
SupplierDeclaredDgHzRegulation : unknown
SurfaceRecommendation : Glass, Metal
UnitCount : 1
WaterResistanceLevel : waterproof
Wattage : 360 watts