Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : YukiHalu
BulletPoint1 : Easy & Accuracy & Powerful: Plug and play. Supports °C/°F display. 1200W/10A Max for each outlet. -22~221℉/-30~105℃ temperature range with 0.1°C accuracy. Replaceable metal probe. Setting memory function
BulletPoint2 : Heating & Cooling Output: Dual relay output. Connect heating and cooling devices at the same time. It can cool and heat to maintain the desired temperature. Compressor delay, protecting your refrigeration/heating equipment
BulletPoint3 : Easy to Read: 2.3'' large LCD display. Display the measured temperature, highest temperature and the lowest temperature at same time
BulletPoint4 : Buzzer Alarm: High and low temperature alarms are available when the temperature is not in the set range. Buzzer alarms when the temperature probe short-circuit and open-circuit. Long-press 'Decrease button' can turn off the buzzer
BulletPoint5 : Widely Used: YukiHalu temperature controller is suitable for ferment beer, greenhouse, seed germination, breeding, incubation, home brew and more with its wide compatibility featured. Used for constant temperature circulation conditions such as heat pump, culture fermentation, aquarium, reptiles and other automatic temperature control sytem
BulletPoint6 : Use to keep your printers 3D resin VAT temperature regulated. Use a clothespin or similar clamp to keep it nice and tight around the vat, allowing quick and easy removal. No need to buy a $70+ solution, and you wouldn't necessarily need a separate 3D resin VAT temperature regulator (with probe), as this device thermocyclers with the ideal resin temperature range already, in case you are looking to save a few dollars in the initial setup. This affordable solution is all you need for perfect prints, every time.
CareInstructions : Do Not Soak
Color : Black
ExternallyAssignedProductIdentifier1 : 0622711010293
ExternallyAssignedProductIdentifier2 : 622711010293
IncludedComponents : Temperature sensor, temperature controller with plug
ItemLength : 4 inches
ItemName : YukiHalu Smart Digital Temperature Controller, 2 Smart Electrical Outlets with Heating and Cooling Modes, for Homebrew Fermentation Breeding Incubation Greenhouse, Reptile and Aquarium
ItemPackageDimensions_Height : 19.1 centimeters
ItemPackageDimensions_Length : 8.4 centimeters
ItemPackageDimensions_Width : 10.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : brewing-and-venting-heaters
LowerTemperatureRating : -58 degrees_fahrenheit
Manufacturer : YukiHalu
Material : plastic
MeasurementAccuracy : 1%
ModelName : sop21
ModelNumber : sop21
NumberOfItems : 1
PartNumber : YUKIHALU-SOP-21-US
PowerSourceType : Ac
ProductDescription :

YukiHalu Digital Temperature Controller

Application:
Ferment beer, greenhouse, seed germination, breeding, incubation, home brew and more with its wide compatibility featured
Used for constant temperature circulation conditions such as heat pump, culture fermentation, aquarium, reptiles and other automatic temperature control system
Pickle refrigerator, garage freezer, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc

Key Performance:
1, Plug and play
2, Dual relay output: Cooling and heating
3, Supports °C/°F display
4, Memory the temperature setting
5, Display the measured temperature, highest and lowest temperature at same time
6, Compressor delay, protecting your refrigeration/heating equipment
7, Durable and replaceable metal probe
8, High and low temperature alarm
9, Temperature probe short-circuit and open-circuit alarm

Specification:
Power: AC 100-250V, 50/60Hz / 1200W
Max Current: 10A for each outlet
Temperature Control Range: -50°C to 110°C (-58°F to 230°F)
Temperature Measurement Range: -30°C to 105°C (-22°F to 221°F)
Type of Temperature Probe: R25=10KΩ±1% B25/85=3435K±1%
Temperature Accuracy: 1%
Compressor Delay: 3 seconds
Dimensions: 134mm x 66mm x 35mm / 5.27" x 2.59" x 1.37"
Weight: 475g / 16.7oz
Probe Length: 6.6 feet
Power Cord Length: 5 feet

ProductSiteLaunchDate : 2021-11-02T06:43:39.862Z
ResponseTime : 1 seconds
Reusability : Reusable
SpecificationMet : FCC
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41112209
UpperTemperatureRating : 230 degrees_fahrenheit
Wattage : 1250 watts