Cart 2 india

Specification
AgeRangeDescription : Adult
Amperage : 0.347 amps
Brand : FermWrap
BulletPoint1 : Keep your yeast warm during the winter months
BulletPoint2 : 40 watts
BulletPoint3 : 115 v
BulletPoint4 : Works great with a temperature controller
BulletPoint5 : Warm notice: the product can be stuck in one place and reusable when you tear it off; Do not place it in a hot place and do not fold the thermometer for storage
CareInstructions : Wipe Clean
Color : Clear
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 00810035501614
ExternallyAssignedProductIdentifier1 : 843200117976
ExternallyAssignedProductIdentifier2 : 0843200117976
ExternallyAssignedProductIdentifier3 : 00843200117976
FormFactor : Rectangular
FuelType : Electric
HeatingCoverage : 2 square feet
HeatingMethod : Convection
HeatOutput : 40 watts
ImmersionDepth : 4 inches
IncludedComponents : 5 Horizontal Temp Strips
IndoorOutdoorUsage : indoor
ItemDisplayDimensions_Height : 0.2 inches
ItemDisplayDimensions_Length : 30 inches
ItemDisplayDimensions_Width : 3 inches
ItemLength : 5.1 inches
ItemName : FermWrap FE650-40 Watt Fermentation Heater
ItemPackageDimensions_Height : 40.5892 centimeters
ItemPackageDimensions_Length : 6.1976 centimeters
ItemPackageDimensions_Width : 6.1976 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : brewing-and-venting-heaters
LowerTemperatureRating : 64 degrees_fahrenheit
Manufacturer : FermWrap
Material : Glass
ModelName : Thermometer Strip
ModelNumber : FE650
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfSpeeds : 1
OperatingTemperature : 75 degrees_celsius
PartNumber : FE650
Pattern : ITC-308S + 1.97" NTC Probe
PowerSourceType : Electric
ProductDescription : Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution (11" tall x 25" wide.). Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20 degrees Fahrenheit. This differential can be increased by using our carboy bag to insulate a carboy (this has been tested). To decrease the temperature differential, stick only a portion of the FermWrap to the fermenter. With 40 watts of heat spread over almost two square feet it provides gentle even heating. Draws 40 watts. 115 V. For greater results, we recommend a temp controller and carboy thermowell for the ultimate in fermentation temperature control. Or for the best control, use the dual stage control and carboy thermal well, as well as a refrigerator, to control both the high and low temps. This is the original FermWrap(TM) manufactured and wired by Fermentap in the USA. Be aware there are now some imitations being sold coming from China that have the electrical wire connections, where the cord meets the heat wrap, sealed with silicone. The FermWrap uses the proper electrical clip connections which are safer and will last longer.
ProductSiteLaunchDate : 2012-09-08T04:21:52.298Z
ResponseTime : 2000 milliseconds
Reusability : Reusable
Size : ITC-308S+NTC Probe
SpecificationMet1 : NSF
SpecificationMet10 : NIST
SpecificationMet11 : HACCP
SpecificationMet12 : CSA
SpecificationMet13 : ISO 9001
SpecificationMet14 : ISO 9000
SpecificationMet15 : RoHS
SpecificationMet16 : UL
SpecificationMet17 : WEEE
SpecificationMet18 : EMC
SpecificationMet19 : ETL
SpecificationMet2 : CE
SpecificationMet20 : FE
SpecificationMet3 : FDA
SpecificationMet4 : CCC
SpecificationMet5 : ISO 13485
SpecificationMet6 : ASTM
SpecificationMet7 : FCC
SpecificationMet8 : ASME
SpecificationMet9 : ANSI
StreetDate : 2017-07-29T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40101800
UpperTemperatureRating : 93 degrees_fahrenheit
Voltage : 115 volts