Cart 2 india

Specification
Brand : WORKPRO
BulletPoint1 : ✔[Fast Heating]: The electric mini heat gun features two working voltage switches: the first level is 200V, and the second level is 400V. It can quickly heat up to 400W power in just 1.5 seconds. Unlike other heat guns that have only one power source, our heat gun provides you with a wider and more efficient selection of working scenarios.
BulletPoint2 : ✔[2 Temperature Settings]: The WORKPRO hot air gun, featuring a 3.5Amp motor, can reach two temperature settings - 482℉(250℃) and 842℉(450℃), along with airflow options of 100L/min or 200L/min, within seconds, enhancing the efficiency of your work. The 5.9ft ultra-long cable facilitates crafting in larger areas more conveniently.
BulletPoint3 : ✔[HIGH QUALITY & SAFE]: This compact heat gun comes equipped with a nozzle safety guard to protect you from high temperatures and potential burns. Our products have undergone rigorous testing, including high and low-temperature tests. They were subjected to a high temperature of 158℉ (70℃) for 2 hours and a low temperature of -9.4℉ (-23℃) for 2 hours, cycled 4 times without any discernible change in quality.
BulletPoint4 : ✔[Multi Application]: Widely used and perfect for DIY projects. This small heat gun can be used for shrink wrapping, paint removal, air bubble removal, candle making, electronics repair, watercolor drying, defrosting, and more. If you enjoy DIY, it is a great tool for creating your handmade work. CAUTION: Not suitable for soldering.
BulletPoint5 : ✔[What You Will Get]: 1x200/400W Heat Gun, 1xReflector Nozzle, 1xUser Manual, and our worry-free and friendly customer service. If there are any issues with the product, please feel free to contact our team at any time, and we will provide assistance within 24 hours.
Color : Pink
ExternallyAssignedProductIdentifier1 : 820909693772
ExternallyAssignedProductIdentifier2 : 0820909693772
HeatingElementType : Ceramic
IncludedComponents : 1pc nozzle
ItemName : WORKPRO Heat Gun, 400W Mini Hot Air Gun with Reflector Nozzle, 2 Temp Settings 482℉(250℃)/842℉(450℃) and 5.9ft Long Cable Overload Protection for Craft Embossing, Shrink Wrapping PVC, Drying Paint
ItemPackageDimensions_Height : 28.0924 centimeters
ItemPackageDimensions_Length : 5.4102 centimeters
ItemPackageDimensions_Width : 8.6106 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-heat-guns
Manufacturer : ‎HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD
Material1 : PC
Material2 : TPE
ModelName : W125248AE
ModelNumber : W125248AE
NumberOfItems : 1
PartNumber : W125248AE
PowerSourceType : ac
ProductDescription : The WORKPOR heat gun operates on an input voltage of 120V at 60Hz, with a rated current of 3.5A. It features a two-speed switch, with the 1st gear reaching a temperature of 250℃ and the 2nd gear reaching 450℃. Additionally, it is equipped with non-resettable thermal protection. The machine must meet the following performance criteria: The machine should operate without producing any abnormal noise. It must withstand a high-voltage test of 3000V/5mA/1min without experiencing breakdown or flashover. The power cord should withstand a tension test of 9.1Kg load for 1 minute with <2mm displacement and no breakage. The product should start normally under low voltage conditions, specifically at 0.85 times the rated minimum voltage, tested 10 times. An abnormal test involves running the machine with no load for 1 minute at a voltage 1.15 times the rated voltage. After this test, the safety of the tool, especially the coils and connections, should not be compromised, and the tool should not be used intermittently. The switch must undergo 10,000 cycles of a cycle between gear 1, gear 2, and off. After the test, the switch should function normally. A drop test involves dropping the product from a height of 1 meter onto a concrete floor on each of its three weakest surfaces. No functional or safety abnormalities are allowed. The lowest point of the product should be 1 meter higher than the concrete surface. The shell must withstand an impact of 0.5J three times at the inlet, outlet, and weak points without any breakage. The firmness of the glue coating must be tested: Using cotton cloth with a natural force (5-7N), test the rubberized surface 15 times at a frequency of 1s/back and forth. There should be no obvious pilling after the test. Use a tension gauge to vertically pull along the edge of the rubber coating with a force of 10N without detachment. The product must undergo a high and low-temperature test: exposed to 70℃ for 2 hours and -23℃ for 2 hours, cycled four times with no significant change in quality. The durability life test includes: Positioning the air outlet facing downward at a 45-degree angle to the horizontal and blowing an iron plate placed 100mm away directly. Running continuously at the maximum wind and power settings for over 200 hours. Product Configuration: Chassis: PC material + TPE Dryer cover: PC Plug: UL American standard plug with polarity Power cord: 105℃ 16A 300V, exposed length 1.8m Switch: K1-6E-1212C 12(8)A 125V JIABEN Motor: RK-365AS-1775 Accessories: 1pc nozzle
ProductSiteLaunchDate : 2024-03-27T07:00:00.000Z
SpecificUsesForProduct : Residential Use
Style : Gun
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 120 volts
Wattage : 400 watts