Cart 2 india

Specification
Brand : REEHUT
BulletPoint1 : Compatible with all thermoplastics
BulletPoint2 : The non-rotating sliding frame shall be easy to operate without stress
BulletPoint3 : The strong vacuum engine provides an accurate aspiration down
BulletPoint4 : A body that is adjustable and resistant to rust contains various materials
BulletPoint5 : It has a symmetrical heating system which ensures a uniform heat distribution
IncludedComponents : Thermoforming Machine Set
ItemName : REEHUT 1000W Lab Dental Vacuum Forming Machine Blue Vacuum Former Thermoforming Machine with Steel Balls
ItemPackageDimensions_Height : 11.7 inches
ItemPackageDimensions_Length : 9.71 inches
ItemPackageDimensions_Width : 8.19 inches
ItemTypeKeyword : science-lab-heat-blocks
Manufacturer : REEHUT
NumberOfItems : 26
PartNumber : REEHUT-ETUBULUE
ProductDescription :
specification
Colour: white
Voltage: 220v / 50hz 10 per cent; 110v / 60hz 10%
Power: 1000w
Product size: 21*25* 30cm
Pack size: 23*28* 34cm
Weight: 6kg
How to use
1. Put the chalk model on the tray. Use steel balls to bury the part that doesn't need to be formed
2. Set up the PVC film. Lift the clamp of the PVC film to working height
3. Turn on the heater using the heating button. Waiting for the movie to soften.
4. When the PVC film becomes soft enough (it will usually fall from 1 to 2 cm), press down the lifting rod to cover the soft PVC film heated over the plaster model.
5. Turn off the heating. Press the print button and wait 10 to 15 seconds. Finish printing.
6. After cooling the film, use a scissor to remove it.
ProductSiteLaunchDate : 2025-05-08T03:59:59.878Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41000000