Specification Brand : YOUTHINK BulletPoint1 : [Convenient to use] The dial scale is clear and easy to read. The connecting device is more convenient to use with . BulletPoint2 : [Applicable materials] Suitable for general rubber, synthetic rubber, soft rubber, polyfat, leather, wax, etc. BulletPoint3 : [Material] Made of alloy material, it is rust-proof, waterproof and sturdy. BulletPoint4 : [Instructions] Place the sample on a strong flat appearance and apply pressure to the hardness tester. shinf the of the sample with the needle distance at least 12 mm, apply foot pressure to the sample, and apply pressure to the needle vertically on the sample, and keep the pressure within 1 until the foot and sample are in full . During reading. The measured hardness value is measured five times at different positions with an interval of 6 mm or more and the average value is taken BulletPoint5 : 【Product Specifications】Dial Value: 0-100 degrees; Pressure Needle Trip: 0-2.5 mm; Pressure Needle Tip Pressure(A Type): 0.55 N-8.06 N; : 0.1mm; Test Force: 0.5 N; Size: 78*52*22 mm/3.07*2.05*0.87 inch; Weight: 200g. ExternallyAssignedProductIdentifier : 8658769773493 ExternallyAssignedProductIdentifier1 : 0707457447210 ExternallyAssignedProductIdentifier2 : 707457447210 IncludedComponents : No ItemName : Rubber Tire Hardness Tester, Digital Hardness Tester, Hardness Measurement Tool, Suitable for RubberGlassPlasticLeather, Rubber Tire Durometer, Hardness Tester Meter, 0-100 (O ItemPackageDimensions_Height : 4 centimeters ItemPackageDimensions_Length : 13 centimeters ItemPackageDimensions_Width : 8 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : hardness-testing-apparatus Manufacturer : YOUTHINK Material : Plastic MeasurementAccuracy : 0.1mm ModelName : YOUTHINKfzbc0x28wd-02 ModelNumber : YOUTHINKfzbc0x28wd-02 NumberOfItems : 1 PartNumber : YOUTHINKfzbc0x28wd-02 PowerSourceType : Battery Powered ProductDescription : Features:
Easy to use, accurate measurement, easy to carry, STURDY and stable, practical and strong. This rubber hardness tester is a measure of the hardness of the instrument sulfur rubber and plastic products. Made of alloy material, rust-, STURDY, fine workmanship. The dial scale is clear, and the degree is more intuitive and convenient. The connection device is more convenient to use with . Type A is suitable for general rubber, synthetic rubber, soft rubber, polyfat, leather, wax, etc.
Type O is suitable for microporous materials made of foaming agents in plastics.
Type D is suitable for general hard rubber, resin, acrylic, glass, thermoplastic rubber, printing plate, fiber, etc.
Specification:
Type(optional): A, O, D Dial Value: 0-100 degree Pressure Needle Trip: 0-2.5 mm Pressure Needle End Pressure:
A/O Type: 0.55 N - 8.06 N,
D Type: 0-44.5 N : 0.1 mm Test Force: 0.5 N Size: 78×52×22 mm/3.07×2.05×0.87 inch Weight: 200g
Instructions
Place the sample on a solid flat surface, take the hardness tester and apply pressure smoothly with at least 12 mm into the sample, and apply vertical pressure to the sample until the foot and sample completely the pressure. Read. Measure hardness value 5 times at different positions at least 6mm apart and take the average (microporous material is measured at least 15mm). In order to stabilize the judgment conditions and improve the judgment accuracy, the hardness tester device should be in the same judgment with respect to the support of the producer judgment.
Package included:
1 x Rubber Tire Durometer
ProductSiteLaunchDate : 2024-07-17T14:25:11.271Z Size : O type SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1