Specification BatteriesRequired : 1 Brand : HFBTE BulletPoint1 : ◆Directly test Vickers hardness value of workpiece, and there is no need to convert like Leeb or Shore hardness tester. The conversion error is eliminated. BulletPoint2 : ◆High test speed -- output test results within seconds BulletPoint3 : ◆Standard Vickers indentation, tiny indentation, little damage to the workpiece BulletPoint4 : ◆The test results are related to the elastic constants of the workpiece. New workpiece needs to be calibrated according to the elastic constants. BulletPoint5 : ◆Small volume, light weight and easy to carry. BulletPoint6 : ◆Easy to test on assembly line. BulletPoint7 : ◆It can be used for testing on site and testing large workpiece and can be used to make hardness measurements on positions difficult to access, such as tooth flanks or roots of gears. BulletPoint8 : ◆Only measuring the hardness condition of the surface contacted BulletPoint9 : ◆The development of microcontroller technology makes it easy to calibrate workpiece with different elastic constants. IncludedComponents : Ultrasonic Hardness Tester ItemName : HFBTE Ultrasonic Durometer Ultrasonic Hardness Meter Tester Gauge With Test Force 19.6N Maximum Test Surface Roughness Ra<5μm HV50~1599 HRC20~68 HB85~650 Accuracy ±4% HV ±4% HB ±1.5HR USB Interface ItemPackageDimensions_Height : 14 centimeters ItemPackageDimensions_Length : 45 centimeters ItemPackageDimensions_Width : 34 centimeters ItemTypeKeyword : hardness-testing-apparatus Manufacturer : HFBTE ModelName : 2024051006dara ModelNumber : 2024051006dara NumberOfItems : 1 PartNumber : 2024051006dara PowerSourceType : Battery Powered ProductDescription : HFBTE Ultrasonic Durometer Ultrasonic Hardness Meter Tester Gauge With Test Force 19.6N Maximum Test Surface Roughness Ra<5μm HV50~1599 HRC20~68 HB85~650 Accuracy ±4%HV ±4%HB ±1.5HR USB Interface ProductSiteLaunchDate : 2024-05-09T07:00:00.000Z SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnitCount : 1