Cart 2 india

Specification
Brand : HFBTE
BulletPoint1 : (1)Pointer dial: The product uses a pointer dial to display the measurement results, easy to use, accurate measurement, easy to carry, durable and stable, practical and strong.
BulletPoint2 : (2)Test plate: The test plate design is adopted at the bottom. It has a classic non-slip mat, is not easy to rust, is fast and durable, and has a long service life.
BulletPoint3 : (3)It is suitable for the determination of soft foam, polyurethane foam rubber products’ hardness.
BulletPoint4 : (4)It will be different with the other hardness tester In the aspects of using.When using, the presser foot directly contact to the sample, and see its own weight as force measurement load.
BulletPoint5 : (5)Needle stroke range: 0 ~ 2.5 mm; Dial value: 0 to 100 degrees; End force of the needle: 550mN ~ 4300mN (56 ~ 438.5g).
Color : Silver
ExternallyAssignedProductIdentifier : 7641260443607
IncludedComponents : Sponge Hardness Tester
ItemName : HFBTE Soft Foam Hardness Tester Soft Foam Hardness Meter for Measuring Soft Foam, Polyurethane Foam Rubber Products' Hardness
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 30 centimeters
ItemPackageDimensions_Width : 20 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : HFBTE
Material : Alloy probe
MeasurementAccuracy : precise
MetalType : Alloy probe
ModelName : Diydeg27gndrbyfa
ModelNumber : 2024080901dara
NumberOfItems : 1
PartNumber : 2024080901dara
ProductDescription : Introduction:
❤❤In order to measure the hardness of foam, we special tailor-Made the type sponge durometer to facilitate our customers.
❤❤It is suitable for the determination of soft foam, polyurethane foam rubber products’ hardness. And it will be different with the other hardness tester In the aspects of using.
❤❤When using, the presser foot directly contact to the sample, and see its own weight as force measurement load.

Specification:
❤❤Scope of pressure needle route: 0 ~ 2.5 millimeters.
❤❤The scale value: 0-100 degrees.
❤❤The force of pressure needle end: 550mN~4300mN（56~438.5g).

Method of Using
1. Handheld the middle of the instrument, located the hardness tester gently on the plane specimens which is bigger than presser foot (or specimen).
2. Reading out the value in1 seconds when durometers’ presser foot contact with the sample smoothly.
3. And the tick of pointers is the hardness value of sample (specimen).
4. In order to improving the accuracy of measurement, you should put the sample on a flat plate glass or plate.
5. Each measuring point should be measured only one time, the measuring point at a distance of more than 25mm of different parts from the same sample should be more than 5 points.
6. To take the average of measurement results, namely it’s the hardness value of the materials

Packing list:
❤❤1x Set of Hardness Tester
❤❤1 x Box

ProductSiteLaunchDate : 2024-08-08T07:00:00.000Z
Size : Small
Style : Type A Neutral
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1