Cart 2 india

Specification
Brand : ILOPM
BulletPoint1 : TEST RANGE: 0-100HA 0-100HO 0-100HD
BulletPoint2 : RESOLUTION: 0.5HA 0.5HO 0.5HD
BulletPoint3 : ACCURACY: ±1HA ±1HO ±1HD
BulletPoint4 : TIP STROKE: 2.5MM (all same)
BulletPoint5 : TIP DIMENSION: 0.79MM SR2.5MM SR0.1MM
Color : Type O
ExternallyAssignedProductIdentifier : 7509081996941
ItemName : Durometer Tester, Hardness Tester A/O/D 0-100 HA Rubber Tire Tyre Hardness Tester Meter For Plastic Leather Wax Synthetic Shore Durometer,Accurate Measurement(Type O)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : ILOPM
ModelName : 241156876
ModelNumber : 241156876
NumberOfItems : 1
PartNumber : 241156876
ProductDescription : Specification:
MODEL NO: LX-A LX-O LX-D
TEST RANGE: 0-100HA 0-100HO 0-100HD
RESOLUTION: 0.5HA 0.5HO 0.5HD
ACCURACY: ±1HA ±1HO ±1HD
TIP STROKE: 2.5MM (all same)
TIP DIMENSION: 0.79MM SR2.5MM SR0.1MM
STANDARD: GB/T531-1999 HG/T2489-93 GB/T531-1999
SIZE: 95*60*25MM
NET WEIGHT: 0.23KG

A- type applies to general rubber, synthetic rubber, soft rubber, poly-resin, leather, wax, etc.
O-type applies to rubber and contains the tiny hole material that that the vesicant is made in being used for plastic
D-type applies to general hard rubber, hard resin, acryl, glass, thermoplastics, printing plates, fibres, etc.

1.Overview
Shore durometer is used to test hardness of sulfureted rubber and plastics, such instrument has A-type/D-type/C-type.
A-type and D-type apply to test the low and medium level hardness and high level hardness of materials.
C-type applies to test the hardness of shoe-making porous materials made by vesicants within plastics when the compression rate is 50% and stress is beyond 0.049MPa.

2.Main parameters
Dial value:1-100 degree
Pointer journey:0-2.5mm
Stress at the end of pointer:0.55N-8.06N of A-type and C-type;0-44.5N of D-type

3.Operation instructions
Put the sample on a solid plane,hold the durometer to make the pointer at least 12mm away from the sample edge,and stably put the legs of durometer on the sample.Thus the pointer straightly goes into the sample till the legs completely get to the sample.Check the reading in 1s.Repeat shuch test 5 times at different place which are at least 6mm away from the test point and find the average reading(the distance between porous materials is at least 15mm).

Package Included:
1 x Rubber Tire Hardness Tester
ProductSiteLaunchDate : 2024-10-23T03:14:22.886Z
Size : 1