Durometer Tester, EPX5500 Portable Hardness Tester Automatic Impact Devive Type Identification For All Metals Durometer 0?999HLD,Accurate Measurement

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 320100/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : ILOPM
BulletPoint1 : HL Display Range: 0~999HLD
BulletPoint2 : Accuracy: ± 6 HL
BulletPoint3 : Displayer: large LCD, backlight, touch screen
BulletPoint4 : Internal Data Storage: 500 measured value
BulletPoint5 : Resolution: 1 (for HL, HV, HB, HSD, MPa); 0.1 (for HRC,HRB)
BulletPoint6 : Host 1
BulletPoint7 : Webster's hardness block 1 block
BulletPoint8 : Standby pressure needle 1
BulletPoint9 : Correction wrench (1)
Color : One Color
ExternallyAssignedProductIdentifier : 7509081997696
ItemName : Durometer Tester, EPX5500 Portable Hardness Tester Automatic Impact Devive Type Identification For All Metals Durometer 0~999HLD,Accurate Measurement
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : ILOPM
Material : metal
ModelName : 240491751
ModelNumber : 240491751
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 240491751
ProductDescription : Portable Hardness Tester Automatic impact devive type identification for all metals durometer 0~999HLD

Principle
The tester measuring principle is physically a rather simple, dynamic hardness tester.
An impact body with a hard metal test tip is propelled by spring force against the surface of the test piece. Surface deformation takes place when the impact body hits the test surface, which will result in loss of kinetic energy.
This energy loss is calculated by velocity measurements when the impact body is at a precise distance from the surface for both the impact and rebound phase of the test. The permanent magnet in the impact body generates an induction voltage in the single coil of the impact device. The voltage of the signal is proportional to the velocity of the impact body, and signal processing by the electronics provides the hardness reading for display and storage.

Specifications
HL Display Range: 0~999HLD
Accuracy: ± 6 HL
Displayer: large LCD, backlight, touch screen
Internal Data Storage: 500 measured value
Resolution: 1 (for HL, HV, HB, HSD, MPa); 0.1 (for HRC,HRB)
Battery: Rechargeable Ni-MH battery
Operating Temperature: 0°C~+50°C (32°F~122°F)
Storage Temperature: -10°C~+60°C (14°F~140°F)
Dimension: 130 x 87 x 28 mm
Weight: 240g
1.4 Application Range
Good for all metals, for production level testing
Best suited for on-site testing of heavy, big or already installed parts
Handy for difficult to access or confined test locations
Automatic compensation for impact direction
Excellent for material selection and acceptance tests
Easy to use and accurate on curved test surfaces (R > 10 mm)
Metal production & processing, Automotive & transportation, Machinery & power plants, Petro-chemical,
refineries, Aerospace & shipyard, Metal constructions, Testing services & laboratories

Application Ran
ProductSiteLaunchDate : 2024-10-23T03:14:24.794Z
Size : One Size
UnitCount : 1
UnspscCode : 41114611

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.