Cart 2 india

Specification
Brand : ILOPM
BulletPoint1 : Display: LCD, 128×64 graphic dot matrix LCD
BulletPoint2 : Data storage: up to 500 groups
BulletPoint3 : Working voltage: 2×1.5V ordinary alkaline battery(Not include batteries).Continuous working time: about 120 hours (when the backlight is not turned on)
BulletPoint4 : Dimensions: 148×75×32mm.Weight: about 0.6kg. Communication interface：USB.
BulletPoint5 : Measuring materials: steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile cast iron, cast aluminum alloy, copper-zinc alloy (brass), copper-tin alloy (bronze), pure copper, forged steel.
Color : G-type Dvice
ExternallyAssignedProductIdentifier : 7509081998457
IncludedComponents : MAIN HOST
ItemName : Durometer Tester, 7-in-1 Leeb Metal Hardness Tester For HRC,HL,HB,HV,HS,HRB, Durometer For Cast Steel Alloy Cast Aluminum Copper Metal Meters Test,Accurate Measurement(G-Type Dvice)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : ILOPM
Material : metal
MeasurementAccuracy : HIGH ACCURACY
ModelName : 238640691
ModelNumber : 238640691
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 238640691
ProductDescription : Packing List :
1. Main unit
2. model *type impact device With cable
3. Cleaning brush
4. Small support ring
5. Manual
6. Instrument package
7. WIthout calibration block

Description
【D Type device】:
Dimensions: f20*70mm, weight: 75g.
General purpose type, used for most hardness measurements
【DC Type device】:
Dimensions: f20*90mm, weight: 75g.
For measurement in very cramped places (holes, cylinders)；Measure the inner hole wall, the diameter of the hole is greater than 12CM
【C Type device】:
Dimensions: f20*141mm, weight: 75g.
The impact energy is large, the Leeb hardness tester is used to measure the hardness of small, light, thin parts and the surface softening layer
【D+15 Type device】:
Dimensions: f20*162mm, weight: 80g.
Small head, used to measure the hardness of the outer surface of grooves or recesses
【G Type device】:
Dimensions: f30*254mm, weight: 250g.
The impact energy is large, and the requirement for measuring the outer surface is low. Used for large, heavy and rough forging castings
【DL Type device】:
Dimensions: f20*202mm, weight: 80g,
the head becomes thinner and larger, the Leeb hardness tester is used to measure the hardness of narrow grooves and gear surfaces

D -Type device Measuring Range：
(170-960)HLD
(17-68.5)HRC
(19-651)HB
(80-976)HV
(30-100)HS
(59-85)HRA
(13-100)HRB

HL HB HRB HRC HRA HV HS Pipe Steel Plate Mould Metal Hardnes：
Accuracy: ≤6HLD (HLD=800)
Repeatability: ≤6HLD (HLD=800)
Resolution: 1HL, 1HV, 1HB, 0.1HRB, 0.1HRC, 0.1HS
Materials: steel & cast steel, alloy tool steel, stainless steel, grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy.
Impact devices: D (optional impact devices: C,G,DC,DL)
ProductSiteLaunchDate : 2024-10-23T03:14:27.604Z
Size : 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41114611