Cart 2 india

Specification
Brand : Alfa Tools
BulletPoint1 : Hand tap - special thread
BulletPoint2 : 8-24 tap size, taper style
BulletPoint3 : Taper taps (7 to 10 threads); longest chamfer insures easier starting
BulletPoint4 : General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (closed one end)
BulletPoint5 : Quantity -1 per pack
Color : Silver
ExternallyAssignedProductIdentifier1 : 721511436088
ExternallyAssignedProductIdentifier2 : 0721511436088
ExternallyAssignedProductIdentifier3 : 00721511436088
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Alfa Tools
ItemName : Alfa Tools HTSPT71303 8-24 Hss Special Thread Tap-Taper
ItemPackageDimensions_Height : 1.375 inches
ItemPackageDimensions_Length : 2.75 inches
ItemPackageDimensions_Width : 2.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-threading-taps
Manufacturer : Alfa Tools
Material : High Speed Steel
MeasurementSystem : Metric
ModelName : 1/4-20 UNC
ModelNumber : HTSPT71303
NumberOfItems : 1
PartNumber : HTSPT71303
ProductDescription : Attributes:
* Thread Size: M2 x 0.4
* Square Shank Width: 2mm / 0.08"
* Thread Length: 13mm / 0.51"
* Overall Length: 36mm / 1.42"
* Material: High Speed Steel (HSS)

What Is Included:
* 5 Pairs x Hand Threading Taps

Applications & Features:
--- Suitable for tapping through or shallow and blind holes. Straight flutes design, downward chip removal, clear threads without burrs, fast thread processing. Hand taps can create new female threads or re-thread damaged or jammed female threads. Used for threading aluminum, mild steel, copper, hard plastic, etc. Hand taps are used by tap wrenches. Taper taps start tapping threads at right angle to workpieces, plug taps is generally used for drilling through holes, and bottom taps create threads at the bottom of holes.
--- High speed steel screw taps are high hardness, high strength, good toughness, and wear resistance. Only the base substrate, without any additional coatings, good for general purpose applications. Tapping oil is lubrication, cooling and anti-sticking. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). Drill holes with a twist drill before tapping, and the tapping angle should be 90 degrees vertical and stable.

Useful Tips:
--- The higher the hardness, the slower the speed. Fast speed and low torque; slow speed and high torque. When tapping plastic, add lubricating coolant. For steel, motor oil is generally used, and vegetable oil is used for high requirements. Apply anti-rust oil for maintenance after use to prolong the service life.
ProductSiteLaunchDate : 2013-07-16T02:36:07.765Z
Size : 3/4"-20
SpecificUsesForProduct : Hand Use
Style : Plug
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700