Cart 2 india

Specification
Brand : Nitto Kohki
BulletPoint1 : Threaded adapter PT1/4" x NPT1/4"
BulletPoint2 : 2mm allen wrench
BulletPoint3 : Flat and round end files included
BulletPoint4 : Country of origin: Japan
Color : golden, blue
ExternallyAssignedProductIdentifier1 : 0702472873730
ExternallyAssignedProductIdentifier2 : 702472873730
ItemName : Nitto Kohki MAH-16 Micro Air Hand Filer, 85 PSI, 11000 SPM, 2.2mm Stroke Length, 3 mm File Shank
ItemPackageDimensions_Height : 4.826 centimeters
ItemPackageDimensions_Length : 27.686 centimeters
ItemPackageDimensions_Width : 14.224 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-files
Manufacturer : Nitto Kohki USA
Material : Diamond
ModelNumber : NIT MAH-16
NumberOfItems : 1
PartNumber : MAH-16
ProductDescription : To prolong the life of the file, you must observe the following rules:

1. Do not use the new file dropped hard metal;

2. No contusion and hardened materials with a file;

3. Crusty or sand forgings and castings, shall be grinding away on the grinder in order to use half sharp filed cutting;

4. New files use side, when after the blunts, then the other side.

5. When filing, often with a steel wire brush to clean chips on tooth-filing.

6. File is not overlapping or stacked together and other tools;

7. When using the file should not be too fast, or easy to wear prematurely.

8. File to prevent water, oil, or other dirt;

9. Fine file does not allow file soft metals;

10. Use assorted files should not be too large, so as not to break.

Each set of 10 different shapes, including smooth and sharp, oval, rounded tip, knife edge, square, cylindrical, trigonous, semi-circular, triangular, flat, suitable for all kinds of grinding, modeling, strong and durable
ProductSiteLaunchDate : 2014-09-16T08:00:01.000Z
StreetDate : 2017-11-25T00:00:01Z
UnitCount : 1