Cart 2 india

Specification
Brand : Carving Expert
BulletPoint1 : Shank:5mm; total length: 180mm
BulletPoint2 : File styles and sizes used frequently are picked in a pack, ten pcs
BulletPoint3 : Used for polishing, making model, shaping, sharpening and more
BulletPoint4 : Steel files coated with emery, hard enough for grinding, abrasive tools
Color : golden, blue
ExternallyAssignedProductIdentifier1 : 0702472873730
ExternallyAssignedProductIdentifier2 : 702472873730
ItemName : 10pcs 5mm×180mm 180 Grits Diamond File Sharpener (Golden)
ItemTypeKeyword : hand-files
Manufacturer : Carving Expert
Material : diamond
ModelNumber : CE1002
ProductDescription : To prolong the life of the file, you must observe the following rules:

1. Do not use the new file dropped hard metal;

2. No contusion and hardened materials with a file;

3. Crusty or sand forgings and castings, shall be grinding away on the grinder in order to use half sharp filed cutting;

4. New files use side, when after the blunts, then the other side.

5. When filing, often with a steel wire brush to clean chips on tooth-filing.

6. File is not overlapping or stacked together and other tools;

7. When using the file should not be too fast, or easy to wear prematurely.

8. File to prevent water, oil, or other dirt;

9. Fine file does not allow file soft metals;

10. Use assorted files should not be too large, so as not to break.

Each set of 10 different shapes, including smooth and sharp, oval, rounded tip, knife edge, square, cylindrical, trigonous, semi-circular, triangular, flat, suitable for all kinds of grinding, modeling, strong and durable
ProductSiteLaunchDate : 2014-09-22T09:59:50.129Z