Cart 2 india

Specification
Brand : YFYIQI
BulletPoint1 : 1.Sphere semidiameter at the end of the flip rod: 25±1.0(mm)
BulletPoint2 : 2.The button applies stretching technics and is not easy to fall off; the pointer is easy to adjust friction.
BulletPoint3 : 3.Length of pointer: 20.0±0.2(mm)
BulletPoint4 : 4.Friction of pointer: 0.65±0.15(N)
BulletPoint5 : 5.Light (saving 2/3 forces compared with counterpart products), flexible, inexpensive, power-free, easy to master;
Color : Black and Red
ExternallyAssignedProductIdentifier1 : 0762102880521
ExternallyAssignedProductIdentifier2 : 762102880521
IncludedComponents : Buffer spring
ItemName : YFYIQI Portable Concrete Rebound Hammer Tester NDT Resiliometer Test Meter Tool with Length of Pointer 20.0±0.2mm
ItemPackageDimensions_Height : 4.09 inches
ItemPackageDimensions_Length : 13.78 inches
ItemPackageDimensions_Width : 8.23 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hammer-holsters
Manufacturer : YFYIQI
Material : Aluminum
MeasurementAccuracy : Length of pointer: 20.0±0.2 (mm)
NumberOfBoxes : 1
NumberOfItems : 100
PartNumber : YFYIQI
PowerSourceType : Battery Powered
ProductDescription : YFYIQI Portable Concrete Rebound Hammer Tester NDT Resiliometer Test Meter Tool With Length of pointer 20.0±0.2mm

Introduction

The meter is in accordance with technical regulation of JGJ/T23-2001, used for testing of concrete compressive strength within the scope of 10-60Mpa, with the system standard energy of 2.207J, and value indicating system of pointer direct reading.

Our concrete resiliometer has been approved as "Recommended Product for Engineering Construction" by the Ministry of Construction. Shanxi Institute of Building Research, who composed "Testing Concrete Compressive Strength Technical Regulation of JGJ/T23-2001 with Springback Method", supervises the manufacturing process.

Light (saving 2/3 forces compared with counterpart products), flexible, inexpensive, power-free, easy to master; the button applies stretching technics and is not easy to fall off; the pointer is easy to adjust friction. Therefore, it is the first choice applicable for on-the-spot NDT.

Specifications:

1.Length of pointer: 20.0±0.2(mm)
2.Friction of pointer: 0.65±0.15(N)
3.Sphere semidiameter at the end of the flip rod: 25±1.0(mm)
4.Rigidity of flip tensioned spring: 785.0±40.0(N/m)
5. Location of flip hammer's hook release: "100" at the scale mark
6.Work length of flip tensioned spring: 61.5.0±0.3(mm)
7.Strike length of flip hammer: 75±0.3
8.Hop location of the flip hammer: "0" at the graduated scale
9.Fixed value of steel anvil: 80±2 (our products are controlled between 80-81)
10. Standard Accessories: A resiliometer, Grindstone, Flip tension spring, Buffer spring, Screwdriver, Instruction
ProductSiteLaunchDate : 2021-12-13T08:00:00.000Z
Size : Medium
UnspscCode : 41113700