Cart 2 india

Specification
Brand : Aitoserlea
BulletPoint1 : Name: Spring Impact Hammer
BulletPoint2 : Material: stainless steel (the outer shell is aluminum alloy)
BulletPoint3 : Outer diameter: 50mm
BulletPoint4 : Hammerhead radius: 10mm
BulletPoint5 : Hammerhead weight: 60g
BulletPoint6 : Impact component weight: 250g (fired ball handle and hammerhead)
BulletPoint7 : Hammerhead impact release: less than 10N (made of white polyprene)
DrillType : hammer_drill
IncludedComponents : Spring Impact Hammer
IsElectric : 1
ItemName : IEC60068 Spring Impact Hammer Spring Impactor Impact Testing Machine (with 1.0J Hammer)
ItemPackageDimensions_Height : 2.8 inches
ItemPackageDimensions_Length : 7.9 inches
ItemPackageDimensions_Width : 7.9 inches
ItemTypeKeyword : power-hammer-drills
Manufacturer : top-tool
ModelName : Spring Impact Hammer
ModelNumber : MH24082101
NumberOfItems : 1
PartNumber : FACAI0007
PowerSourceType : OTHER
ProductDescription : IEC60068 Spring Impact Hammer Spring Impactor Impact Testing Machine

Description:
1. Spring impactor is manufactured according to the corresponding clauses/standard requirements of GB/T2423.55-2006, IEC60068-2-75, GB4706.1, GB8898 and GB7000, IEC884 and UL1244, for the impact resistance test of electronic and electrical products
2. It is suitable for mechanical strength test of housing/joystick/handle/knob/signal/light cover for household appliances and similar electrical appliances/electronics/lamps/electrical accessories to ensure that the tested products can withstand the reckless operation that may occur, or other accidents, so that electrical products can run safely and reliably, without harming people

Specifications:
1. Impact energy and error:
* 0.14J: ±0.014J
* 0.20J: ±0.020J
* 0.35J: ±0.03J
* 0.50J: ±0.04J
* 0.70J: ±0.05J
* 1.00J: ±0.05J
* 1.50J: ±0.07J
* 2.00J: ±0.08J
2. Material: stainless steel (the outer shell is aluminum alloy)
3. Length: 211mm
4. Weight: 1250g
5. Outer diameter: 50mm
6. Hammerhead weight: 60g
7. Hammerhead radius: 10mm
8. Impact component weight: 250g (fired ball handle and hammerhead)
9. Hammerhead impact release: less than 10N (made of white polyprene)
10. Universal type(with 6 energy hammer): 0.14J, 0.20J, 0.35J, 0.50J, 0.70J, 1J adjustable

Instructions:
1. Fix the sample according to the relevant standard requirements, select the impact test point to pull the operation handle, and the impact device is in the standby state
2. Align the impactor perpendicular to the surface of the sample and contact it to push the impactor and perform an impact test on the sample

 Note:
1. Please use it in a horizontal state
2. When not in use, the device should be in a released state
3. This instrument is a precision instrument, please take it lightly
ProductSiteLaunchDate : 2024-08-21T10:21:42.874Z
Size : with 1.0J Hammer
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Voltage : 20 volts