Description
Our two-stroke gasoline jack hammer is made of high-quality materials and is durable. With a displacement of 52CC and an impact frequency of 1500 times per minute, it can effectively improve your work efficiency. It is easy to operate, but powerful, making it a great assistant for your work.
Specification
Material: Plastic, Rubber, Steel, 65 Manganese Steel
Process: Integrated Die-Casting
Color: Red + Black
Assembly Required: Yes
Power Source: Gasoline Powered
Start Method: Hand Pull Start
Stroke: Two-Stroke
Spark Plug Type: Two-Stroke Spark Plug
Applicable Oil Type: Two-Stroke Engine Oil
Displacement: 52CC
Fuel Consumption: ≤0.6L/h/0.16Gal/h
Impact Frequency: 1500 Times/min
Power: 1900W
Speed: 6500RPM
Fuel Tank Capacity: 1.2L/0.32Gal
Mixing Ratio: 1:25
Impact Energy: 55J
Duration of Use: 1h
Pickaxe Length: 31cm/12.2in
Product Size: 40 * 27 * 95cm/15.74 * 10.62 * 37.4in
Package Size: 76 * 41 * 36cm/29.92 * 16.14 * 14.17in
Gross Weight: 22.45kg/49.49lbs
Package Included
1 * Jack Hammer
1 * Pointed Pickaxe
1 * Flat Pickaxe
1 Set * Tools
1 * Funnel
1 * English Manual
Details
Large Fuel Tank: The 0.32Gal fuel tank extends refueling time and allows your machine to work for a long time.
Fuel Tank See-through Hole: You can observe the amount of fuel remaining in the tank, allowing you to add it in time.
Hand Pull Disc: You can light-pull it to start this machine, which is convenient and easy.
Conspicuous Signs: Important safety precautions are marked on this product to remind users to pay attention to safety.
Application
This product is suitable for trenching, chipping, and breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimneys, and in areas and work such as mines, railways, construction sites, and maintenance of high mountain power towers with inconvenient access to electricity and transportation.
How to Use
Installation Method of Pickaxe
1.Pull out the rotating clip with the dot facing upwards.
2.Insert the pickaxe.
3.Pull out the rotating clip with the dot facing downwards.
Quick Start Method
1.Turn up and close the air door.
2.Press the oil bubble to fill it with oil.
3.Pull the start-pull rope.
4.Lower and open the air door.
5.Pull the pull rope again.
6.The startup is completed.
Notes
1.Please note that this product cannot be used for digging trees.
2.Before use, please carefully read the product manual and nameplate, especially the safety precautions section.
3.Before starting up, ensure that the switch is in the OFF position.
4.The air filter sponge needs to be replaced every 36 hours of work. The air filter needs to be cleaned thoroughly after working for 8 hours. Removing the air filter during work is prohibited. The carburetor must be cleaned thoroughly after every 100 hours of operation before use.
5.The mixing ratio of gasoline and engine oil (not included) is generally 25:1, but due to differences in engine oil quality in different regions, we recommend using a ratio of 20:1. The recommended engine oil is two-stroke special engine oil (cheap engine oil is refused).
6.It is best to pack it in plastic bags (not included) when not in use to prevent dust and moisture from entering the machine and affecting its use.
7.If the product is not used for a long time, the fuel and oil in the tank must be cleaned thoroughly.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.