Cart 2 india

Specification
Amperage : 8.5 amps
Brand : AB Tools
BulletPoint1 : Includes: Air Hammer, Needle Descaler & Chisels
BulletPoint2 : Heat Treated Piston
BulletPoint3 : Variable Air Control
BulletPoint4 : 1/4" BSP Air Inlet
BulletPoint5 : Average air consumption: 5cfm @ 90 PSI
Color : Clear
ExternallyAssignedProductIdentifier : 5056133314243
ExternallyAssignedProductIdentifier1 : 648846053868
ExternallyAssignedProductIdentifier2 : 0648846053868
Hazmat1 : auto-grounding
Hazmat10 : EG_NoAir
Hazmat11 : ES_NoAir
Hazmat12 : FR_NoAir
Hazmat13 : GB_NoAir
Hazmat14 : IN_NoAir
Hazmat15 : IT_NoAir
Hazmat16 : JP_NoAir
Hazmat17 : MX_NoAir
Hazmat18 : NL_NoAir
Hazmat19 : PL_NoAir
Hazmat2 : 3
Hazmat20 : SA_NoAir
Hazmat21 : SE_NoAir
Hazmat22 : SG_NoAir
Hazmat23 : TR_NoAir
Hazmat24 : US_NoAir
Hazmat25 : ZA_NoAir
Hazmat3 : AE_NoAir
Hazmat4 : AU_NoAir
Hazmat5 : BE_NoAir
Hazmat6 : BR_NoAir
Hazmat7 : CA_NoAir
Hazmat8 : CN_NoAir
Hazmat9 : DE_NoAir
IncludedComponents : Bare-Tool
ItemName : Air Hammer Chisel 150mm & Air Needle Descaler Removes Rust Body Panel Work
ItemPackageDimensions_Height : 9.2 inches
ItemPackageDimensions_Length : 20.4 inches
ItemPackageDimensions_Width : 10.2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-hammer-drills
Manufacturer : AB Tools
Material : Carbon Steel
MaximumPower : 550 watts
ModelNumber : ZRR5011
NumberOfItems : 1
PartNumber : TE142_TE143
PowerSourceType : Air-Powered
ProductDescription : Air Hammer Specifications:

Professional tool for commercial or occasional use

Ideal for handling a large range of cutting requirements

Delivers hard hitting hammering

Long life alloy steel barrel for strength and durability

Delivers hard hitting hammering

Heat treated piston.

Variable air control.

Specifications:

Air inlet 1/4" BSP (standard fitting)

Chisel shank diameter .401"

BPM 4500 (stroke per minute)

Bore diameter 11/16"

Air pressure 90 psi

Piston stroke 25/8"

Average air consumption 5cfm

Total length 63/4"

Includes:

1 x 150mm air hammer

1 x Tapper punch

1 x Ripping chisel

1 x Tailpipe cutter chisel

1 x Spot weld breaker chisel

1 x Coil spring chisel retainer

Descaler Specifications:

Very useful tool suitable for removing paint, rust etc..

Suitable for use on heavier work such as wheels, engine blocks, chassis rails and box sections.

Fits 150mm and 190mm Air chisels/hammers.

Screw on design. Tighten the Allen key grub screws to attach and remove. Loosen during use. (Please note, Allen key pictured is not included)

This attachment is made up of approximately 19 needles which chip away at the surface.

This tool is suitable for removing rust and paint, it screws on the end of a standard size air chisel gun.

Specifications:

To be used with an air chisel gun
Heavy duty steel casing
Knurled ring
Black oxide finish to prevent corrosion
230mm length
30mm diameter (inner)
50mm (outer

ProductSiteLaunchDate : 2017-03-19T17:55:29.332Z
Size : Spring
Speed : 3000 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27110000
Voltage : 110 volts